Roland EARTH Piano handleiding
Handleiding
Je bekijkt pagina 40 van 59
4040
MFX parameter list
Parameter Value Explanation
Delay Center
(msec)
1–2600 [msec] Adjusts the time until the center
delay sound is heard.
Delay Center
(note)
1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Center
Feedback
-98–+98 [%] Adjusts the proportion of the delay
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
HF Damp 200, 250, 315,
400, 500, 630,
800, 1000, 1250,
1600, 2000,
2500, 3150,
4000, 5000,
6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which
sound fed back to the eect is
ltered out. If you don’t want to lter
out any high frequencies, set this
parameter to BYPASS.
Left Level 0–127 Volume of each delay sound
Right Level 0–127
Center Level 0–127
Low Gain -15–+15 [dB] Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-
frequency range
Balance D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
4Tap Pan Delay
This eect provides four delays.
R out
L out
Balance W
Balance W
Balance D
Balance D
Delay 2
Delay 3
L in
R in
Feedback
1
L
2 3
4
R
Delay 1
Delay 4
Quadruple
Tap Delay
Parameter Value Explanation
Delay 1 Time
(sync sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Delay 1 Time
(msec)
1–2600 [msec] Adjusts the delay time from when
the direct sound begins until the
Delay 1 sound is heard.
Delay 1 Time
(note)
1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Delay 2 Time
(sync sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Delay 2 Time
(msec)
1–2600 [msec] Adjusts the delay time from when
the direct sound begins until the
Delay 2 sound is heard.
Delay 2 Time
(note)
1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Delay 3 Time
(sync sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Parameter Value Explanation
Delay 3 Time
(msec)
1–2600 [msec] Adjusts the delay time from when
the direct sound begins until the
Delay 3 sound is heard.
Delay 3 Time
(note)
1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Delay 4 Time
(sync sw)
OFF, ON Synchronize to the tempo of the
DAW if this is ON.
Delay 4 Time
(msec)
1–2600 [msec] Adjusts the delay time from when
the direct sound begins until the
Delay 4 sound is heard.
Delay 4 Time
(note)
1/64T, 1/64,
1/32T, 1/32,
1/16T, 1/32D,
1/16, 1/8T,
1/16D, 1/8, 1/4T,
1/8D, 1/4, 1/2T,
1/4D, 1/2, 1/1T,
1/2D, 1/1, 2/1T,
1/1D, 2/1
Delay 1
Feedback
-98–+98 [%] Adjusts the proportion of the delay
sound that is fed back into the eect.
Negative (-) settings will invert the
phase.
HF Damp
200, 250, 315,
400, 500, 630,
800, 1000, 1250,
1600, 2000,
2500, 3150,
4000, 5000,
6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which
sound fed back to the eect is
ltered out. If you don’t want to lter
out any high frequencies, set this
parameter to BYPASS.
Delay 1 Level 0–127 Volume of Delays 1–4
Delay 2 Level
Delay 3 Level
Delay 4 Level
Low Gain -15–+15 [dB] Amount of boost/cut for the low-
frequency range
High Gain -15–+15 [dB] Amount of boost/cut for the high-
frequency range
Balance D100:0W–
D0:100W
Volume balance between the direct
sound (D) and the delay sound (W)
Level 0–127 Output Level
Bekijk gratis de handleiding van Roland EARTH Piano, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Roland |
| Model | EARTH Piano |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12466 MB |
