Robot Coupe CMP 250 V.V. handleiding
Handleiding
Je bekijkt pagina 7 van 41
8
• Removing the bell from the tube
- Unplug the power mixer.
- Turn the bell in the direction of the arrow
1
(see
next figure) to separate the bell lug
E
from the
tube lug
F
.
- Remove the bell.
If jammed, turn the blades inside the bell in the
direction of the arrow
2
to loosen them from the
drive shaft.
• Removing the blades
- Unplug the power mixer then, hold the blades
with the provided blade-locking tool.
- Using the blade-locking tool, unscrew the drive
coupling then remove the blade for easy cleaning.
- WHISK
• Attaching the whisk holder to the motor unit
(only for CMP Combi)
• Fitting the whisk into the whisk holder
C
B
D
E
BLADE LOCKING
BLADES WITH WATERTIGHT SEALS
BELL
DRIVE COUPLING
BLADE REMOVAL
- Unplug the power mixer.
- Align the flat side
A
of the conical part
C
of the
whisk holder with the catch
B
on the inside of the
aluminum casing.
- Insert the conical part
C
of the whisk holder into
the aluminum casing.
- Turn the whisk holder in the direction of the arrow
(see figure) until it is snugly locked into place.
• Removing the casing
- Unplug the power mixer.
- Turn the whisk holder in the opposite direction
from that used to attach it.
- When it will go no further, remove the whisk
holder from the aluminum casing.
- Grasp the holder in one hand.
- With the other hand, take the first whisk and insert
the shaft
A
into the bore
B
of the whisk holder
drive shaft. Make sure the drive lugs
D
are
properly aligned with the notches.
- As you push the whisk into the holder drive shaft
C
, rotate it slightly in order to slide the drive lugs
into the notches
D
of the drive shaft
C
, thereby
locking the whisk into place inside the shaft.
- To check that the whisk is properly fixed inside the
shaft
C
, gently pull the metal wires.
- Repeat this procedure with the second whisk. If
you cannot push it in properly, remove it, rotate it
90° and start again.
A
Bekijk gratis de handleiding van Robot Coupe CMP 250 V.V., stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Robot Coupe |
| Model | CMP 250 V.V. |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 5781 MB |
