Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 48 van 332
Used to insert the battery pack snap-fit part to fasten the battery pack.
13. AUX OUT
- Trigger output:
When the AUX output is set to "TrigOut", the oscilloscope generates a trigger
and outputs a signal that can reflect the current capture rate of the oscilloscope
via this interface. Connect the signal to a waveform display device and measure
the frequency of the signal. The measurement result is the same as the current
capture rate.
- Pass/Fail:
When the AUX output is set to "PassFail", in the pass/fail test, the instrument
will output a pulse via the [AUX OUT] connector when a passed or failed
waveform is detected during the pass/fail test.
14. EXT TRIG
A BNC connector that is used to input the external trigger signal to the
oscilloscope.
4.5.4 User Interface
1
2
3
4 5
6
7
9
13
10
14
15
8
1112
Figure 4.17 User Interface
1. Waveform View
Quick Start
MHO2000 User Guide
30
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
