Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 234 van 332
18.4 To Set the Output Form of the Test Results
In the "Option" menu of the pass/fail test interface, you can set the follow-up
operations that the oscilloscope will do when test results are generated according to
your needs.
Set the Output Event and Aux Output
• Click or tap the ON/OFF tab for Aux Output to enable or disable the Aux output.
- When enabled, in the Utility menu, the sub-menu AUX Out under the
Setup menu is automatically set to "PassFail". When a successful or failed
event is detected, a pulse will be output from the [AUX OUT] connector.
- If disabled, in the Utility menu, the sub-menu AUX Out under the Setup
menu is automatically set to "TrigOut". The output of the [AUX OUT]
connector is irrelevant with the pass/fail test.
• Click or tap to select "Pass" or "Fail" for the Output Event menu. Then when the
specified output event is detected, a pulse will be output from the [AUX OUT]
connector.
Set the Output Polarity and Output Pulse Width
Click or tap to select "Positive" or "Negative" for the
Polarity menu. Then click or tap
the input field of Pulse to set the pulse width with the pop-up numeric keypad. You
can also use the specified knob indicated in the input field to set the value. The
available range is from 100 ns to 10 ms. By default, it is 1 µs.
Set the Error Action
In the
Err Action menu, you can set the follow-up operations that the oscilloscope
will do when a failed event is detected.
• Stop: indicates stopping sampling when a failed test event is detected.
• Beeper: indicates that the beeper sounds an alarm (irrelevant with the on/off
status of the beeper of the instrument) when a failed test event is detected.
• Screenshot: captures the screen when a failed test event is detected. If an
external storage device is detected, the screenshot will be saved to the external
storage device directly. Otherwise, it will be saved to the local disk.
If "Screenshot" is selected, "Stop" action will be executed forcibly. The sampling
operation will be stopped automatically. After the Screenshot operation is
completed, the sampling will continue.
Pass/Fail Test
MHO2000 User Guide
216
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
