Rigol MHO2034 handleiding
Handleiding
Je bekijkt pagina 235 van 332
18.5 To Start or Stop the Pass/Fail Test Operation
After you have enabled the pass/fail test and completed the settings in the Pass/Fail
menu, click or tap for the Operate menu item to start the test. During
testing, click or tap to suspend testing at any time.
During the test process, the oscilloscope will test the waveforms, display the test
information, and output the test information based on the current of settings. The
"Pass/Fail" measurement results are displayed in the "Result" list. The test interface is
as shown in the figure below.
Figure 18.2 Pass/Fail Test Interface
TIP
• Only when the pass/fail test function is enabled, can you start or stop the pass/fail test
operation, save and load the test mask.
• After starting the test operation, you can neither modify the source channel nor adjust
the test mask.
18.6 To Display the Statistics Information of the Test
Results
When the "Pass/Fail" test is enabled, the test results are displayed under the "Result"
list at the right side of the screen. Click or tap the icon at the lower-right part of
the waveform view to fold the result list.
The statistics information in the pass/fail test results includes number of failed frames,
number of passed frames, and the total number of frames, as shown in the figure
below.
Pass/Fail Test
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved. MHO2000 User Guide
217
Bekijk gratis de handleiding van Rigol MHO2034, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | MHO2034 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 47982 MB |
