Rigol M302 handleiding
Handleiding
Je bekijkt pagina 82 van 84
RIGOL
M300 Quick Guide
32
Troubleshooting
When the failures listed below occur, please solve them according to the following
steps. If the problem persists, please contact RIGOL and provide the system
information of your instrument (Utility Info).
1 The instrument does not start.
1) Check whether the power cord is correctly connected.
2) Check whether the power switch on the front panel is really on.
3) Remove the power cord; check whether the voltage selector is at the proper
scale and whether the power input fuse is burned out. If the fuse is burned
out, replace it with a specified one.
4) Restart the instrument after executing the above inspections.
5) If the problem persists, please contact RIGOL.
2 The USB storage device cannot be recognized.
1) Check whether the USB storage device can work normally.
2) Make sure the USB storage device used is FAT32 format and Flash type.
3) Restart the instrument and insert the USB storage device to check it.
4) If the USB storage device still cannot work normally, please contact
RIGOL.
3 How do I recover the configurations from the last power failure or
unexpected shutdown and continue the work before the shutdown
automatically?
Restart the instrument. Press Utility System, select Power-off using the
up/down arrow key and select “ON” using the left/right arrow key.
4 The screen is too dark.
Press Utility System, select Brightness using the up/down arrow key and
set a proper brightness using the left/right arrow key.
5 The instrument is locked.
1) Check whether the instrument is in remote mode (namely check whether
“Rmt” is displayed in the status bar in the user interface). If yes, you can
press
to exit the remote mode and unlock the front panel.
2) Check whether the front panel of the instrument is locked (namely check
whether
is displayed in the status bar in the user interface). If yes, you
can press and hold
to unlock the front panel.
3) Check whether a progress bar is displayed in the interface. If yes, please
wait and try again until the progress bar disappears.
4) If the problem persists, please restart the instrument.
6 How do I change the system language?
Press Utility System, select Language using the up/down arrow key and
Bekijk gratis de handleiding van Rigol M302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | M302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6204 MB |
