Rigol M302 handleiding
Handleiding
Je bekijkt pagina 61 van 84
Contents RIGOL
M300 Quick Guide
11
Power On and Inspection
1 Connect the power
1) Adjust the power voltage selector on the rear panel according to the power
supply voltage. M300 supports two types of AC power inputs:
If your supply voltage is between 115*(100%-10%) V
and115*(100%+10%) V, please select 115.
If it is between 230*(100%-10%) V and 230*(100%+10%) V, please select
230.
2) Connect the instrument to AC power using the power cord provided in the
accessories.
2 Start the instrument
Press the power key on the front panel and the instrument starts.
After the instrument starts, it checks the modules. This process would take a few
seconds according to the number of modules inserted. During this process, user
operation is forbidden.
3 Check the instrument following the steps below if the instrument
does not start normally
Check whether the power is correctly connected.
Check whether the power key on the front panel is really on.
Remove the power cord and check whether the voltage selector is at the
correct scale and whether the power fuse is burned out. If the fuse is
burned out, replace it with a specified one.
Restart the instrument after finishing the above inspections.
If it still does not work correctly, please contact RIGOL.
AC Power Input Terminal
Bekijk gratis de handleiding van Rigol M302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | M302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6204 MB |
