Rigol M302 handleiding
Handleiding
Je bekijkt pagina 57 van 84
Contents RIGOL
M300 Quick Guide
7
Rear Panel
Figure 4 M300 Rear Panel
1 Slots
M300 provides 5 slots for 5 modules. The 5 slots from left to right in the figure
above correspond to the 5 module indicators on the front panel respectively.
When a module is inserted in the slot, the corresponding module indicator on
the front panel goes on. Figure 4 is the schematic diagram of the rear panel
without any module inserted. For the information of each module, refer to
“Plug-in Module Overview”.
CAUTION
Only a single DMM module is permitted for one mainframe.
2 USB Device Interface
Via this interface, M300 can communicate with the PC as a slave device and you
can control it remotely via the PC.
3 LAN
M300 conforms to the LXI Core 2011 Device standard. The instrument can be
connected to the network via this interface and you can control the instrument
remotely via a PC in the same network.
4 Analog Bus Interface (Female)
M300 provides two internal 2-wire analog buses for signal routing as well as an
external analog bus interface (namely analog bus interface). The analog bus
1 2 3 4 5
9
10
6
7
8
Bekijk gratis de handleiding van Rigol M302, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rigol |
| Model | M302 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6204 MB |
