Handleiding
Je bekijkt pagina 136 van 516
When using the four-line LCD panel model
1. Press the [Duplex] key.
DYG321
2. Press the [ ] key or [ ] key to select [Manual 2 Sided Scan Mode], and then press
the [OK] key.
3. Place the original on the exposure glass front side down and with the top to the rear
of the machine.
Place the originals one by one.
4. Press the [Start] key.
A message prompting you to place the original back side down on the exposure glass
appears on the display.
5. Place the original on the exposure glass with the back side faced down and with the
top to the rear of the machine.
6. Press the [Start] key again.
When all originals have been scanned, press the [
] key.
• After you load the original, press the [Start] key within the time specified in [System Reset Timer] or
[System Auto Reset Timer]. Otherwise, the job is canceled. For details, see page 274
"Administrator Tools Settings (When Using the Touch Panel Model)" or page 316 "Administrator
Tools Settings (When Using the Four-line LCD Panel Model)".
• Sort is not available.
4. Copying Originals
134
Bekijk gratis de handleiding van Ricoh M 320F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ricoh |
| Model | M 320F |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 35151 MB |
Caratteristiche Prodotto
| Soort bediening | Touch |
| Kleur van het product | Black, White |
| Ingebouwd display | Ja |
| Gewicht | 18000 g |
| Breedte | 405 mm |
