Handleiding
Je bekijkt pagina 314 van 428
9. Security
312
9
2. Click [Configuration] on the [Device Management] menu.
3. Click [SSL/TLS] in the "Security" category.
4. Select the protocol to enable encrypted communication on "SSL/TLS" to
specify the details about the communication method.
• Permit SSL/TLS Communication: Select one of the encryption
communication modes below, and then specify whether to activate HSTS.
To activate HSTS, specify the max-age attribute in the range of 0 to
31,536,000 seconds as well. While HSTS is activated, HTTPS
communication is automatically used for connections from the Web
browser to the machine. The max-age attribute is renewed every time Web
Image Monitor and HSTS remains active for the same period.
• Ciphertext Priority: Performs encrypted communication when a device
certificate has been created. If encryption is not possible, the machine
communicates data in clear text.
• Ciphertext/Cleartext: Performs encrypted communication when
connecting to the machine using an "https" address from a Web
browser. Communicates in clear text when connecting to the machine
using an "http" address.
• Ciphertext Only: Allows encrypted communication only. If encryption
is not possible for some reason, the machine cannot communicate. If
this is the case, press [System Settings] [Network/Interface]
[Communication Security] [Permit SSL/TLS Communication] on the
control panel, change the communication mode to
[Ciphertext/Cleartext] temporarily, and then check the settings.
• SSL/TLS Version: Specify TLS 1.3, TLS 1.2, TLS 1.1, TLS 1.0, and SSL 3.0 to
enable or disable. At least one of these protocols must be enabled.
• Encryption Strength Setting: Specify the encryption algorithm to apply to
AES, CHACHA20, 3DES, and RC4. You must select at least one check box.
• KEY EXCHANGE: Specify whether to enable or disable exchanging of the
RSA key.
• DIGEST: Specify whether to enable or disable SHA1 DIGEST.
5. Click [OK].
6. Log out of the machine, and then exit the Web browser.
To encrypt communications with the SMTP server, use the following procedure
to change [Use Secure Connection (SSL)] to [SMTP over SSL] or [STARTTLS].
• To use HSTS, a certificate issued by a certificate authority must be installed.
• While HSTS is active, selecting "Close" for "Port 443" of "SSL/TLS" on the
"Network Security" screen makes Web Image Monitor inaccessible.
Bekijk gratis de handleiding van Ricoh IM 370, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ricoh |
| Model | IM 370 |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 47753 MB |
Caratteristiche Prodotto
| Soort bediening | Touch |
| Kleur van het product | Wit |
| Ingebouwd display | Ja |
| Gewicht | 41000 g |
| Breedte | 374 mm |
