Rheem 876A26PF handleiding
Handleiding
Je bekijkt pagina 8 van 48
SAFETY, WARNINGS, INSTALLATION NOTES
8
• Do not spray aerosols in the vicinity of this water heater while it is in operation. Propellants and gases in
many aerosol sprays contain hydrocarbons which are flammable. Gases from aerosol sprays may also
become corrosive when drawn into a flame.
• Do not use or store flammable materials in or near this water
heater. Flammable liquids (such as petrol), combustible
materials (such as newspapers) and similar articles must be kept
well away from the water heater and the flue terminal.
• Do not store swimming pool chemicals, household cleaners,
etc., near the water heater.
• Do not place articles on or against this water heater, or in contact
with the flue terminal. Ensure the flue terminal is not obstructed
in any way at any time.
• Do not use Propane / Butane gas mixtures in a Propane model.
A Propane model is designed to operate on Propane only. The
use of Propane / Butane mixture, such as automotive LP gas
fuel, in a Propane model is unsafe and can cause damage to the
water heater.
• The water heater has a frost protection system to protect against damage by preventing ice forming in the
waterways of the water heater, in the event of freezing conditions occurring. The frost protection system
will be rendered inoperable if electrical power is not available at the water heater. If it is necessary to
switch the power off to the water heater and there is a risk of freezing, then it is necessary to drain the
water heater.
Refer to:
“Frost Protection” on page 12, and
“Draining the Water Heater” on page 14.
INSTALLATION NOTES
This water heater must be installed:
• by a qualified person,
• in accordance with the installation instructions,
• in compliance with the Plumbing Code of Australia (PCA) and Plumbing Standard AS/NZS 3500.4,
This water heater is designed for outdoor installation only.
This water heater is intended to be permanently connected to the water mains and not connected by
a hose-set. A braided flexible hose or semi-flexible connector may be used for connection to the water
heater, where permitted by AS/NZS 3500.4.
• in compliance with the Gas Installations Standard AS/NZS 5601.1,
The Gas installations Standard AS/NZS 5601.1 places limitations on the location of a gas water heater
within a covered area.
Refer to “Installation within a Covered Area” on page 22.
• in compliance with all local codes and regulatory authority requirements.
Installation and commissioning requirements and details for the installing plumber and licensed electrical
worker are contained on pages 20 to 46.
Bekijk gratis de handleiding van Rheem 876A26PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rheem |
| Model | 876A26PF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7567 MB |