Rane Zonetech handleiding
Handleiding
Je bekijkt pagina 13 van 28
13
Limiter Threshold (Threshold)
The limiter ensures the output audio signal
does not exceed this volume level: -60.0 to
0.0 dB (default: 0.0 dB).
Note: If a device (e.g., a power amplifier)
later in the signal path than Zonetech is
using a limiter, the limiter with a lower
threshold will determine the maximum level.
Output Mode (Mode)
(Zone 6 only)
This determines whether Zone 6’s output
signal is stereo (left and right) (Stereo) or
mono with two-way crossover (X-Over).
Tip: If you are using a subwoofer and
main loudspeaker with this zone, use the
mono setting, and use the X-Over Freq,
Low Level, and High Level settings to
manage the signal.
X-Over Frequency (X Freq) (Zone 6 only)
This determines the frequency at which the
low frequencies and high frequencies are
split between the subwoofer and main
loudspeaker: 80–300 Hz (default: 125 Hz).
X-Over Low Level (XL Level)
(Zone 6 only)
This is the output volume level of the audio
frequencies below the crossover frequency:
-10.0 to +6.0 dB.
Tip: This is essentially the master volume
of the Zone 6 subwoofer.
X-Over High Level (XH Level) (Zone 6 only)
This is the output volume level of the audio
frequencies above the crossover
frequency: -10.0 to +6.0 dB.
Tip: This is essentially the master volume of
the Zone 6 main loudspeaker.
Bekijk gratis de handleiding van Rane Zonetech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | Zonetech |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2241 MB |
