Rane Zonetech handleiding
Handleiding
Je bekijkt pagina 12 van 28
12
PEQ Level
This is the amount of “boost” (increase) or
“cut” (decrease) of the mid-range parametric
equalization band: -15.0 to +8.0 dB.
PEQ Frequency (PEQ Freq)
This is the center frequency of the mid-
range parametric equalization band: 40 Hz
– 16 kHz (default: 630 Hz).
PEQ Bandwidth (PEQ Band)
This is the width of the mid-range
parametric equalization band: 0.300–4.000
oct (octaves) (default: 0.500 oct).
High Shelf Level (HS Level)
This is the amount of “boost” (increase) or
“cut” (decrease) of the high-frequency
shelving filter: -15.0 to +8.0 dB.
High Shelf Frequency (HS Freq)
This is the center frequency of the high-
frequency shelving filter: 630 Hz – 16 kHz
(default: 630 Hz).
Tip: Lower values allow you to boost treble
frequencies more but increases the risk of
overdriving the tweeters.
Page Enable (PG Enable)
This feature determines whether or not the
zone will receive an audio signal from the
pager: Enabled (on), Disabled (off).
Note: If this feature is on, remember to set
the Output Paging Level, which is
independent of the normal Zone Output
Level.
Page Level (PG Level)
This is the output volume level of the pager:
-30.0 to +12.0 dB (default: 0.0 dB).
Page Ducker Depth (PG Duck)
This determines how much the pager,
when activated, will attenuate the normal
output signal: 0.0 to -85.0 dB (default:
-12.0 dB).
Tip: Setting this to -85.0 dB will completely
mute the normal output signal when the
pager is on.
Bekijk gratis de handleiding van Rane Zonetech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | Zonetech |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2241 MB |
