Rane Zonetech handleiding
Handleiding
Je bekijkt pagina 14 van 28
14
Paging
You can use Zonetech’s display, Info knob, and Left/Right (/) buttons to edit the paging
settings.
To view Paging settings, press the Page button.
To edit the Paging settings, use the Left/Right (/) buttons to show the previous or
next setting (respectively). Turn the Info knob to adjust the value of each setting.
Note: To control the page settings remotely, you can also use a web-based interface
on your computer (connected to the Computer Ethernet port), or an optional Rane RAD
device (e.g., RAD16z, RAD26, etc.) connected to the Pager port.
These are the editable pager settings. The abbreviated name (shown when the setting is not
selected) is in parentheses.
Input Level (Level)
This is the pager volume level: -88.0 to
+12.0 dB. This is independent of the
pager’s chime volume level (see below)
and independent of the Zone level.
Low Shelf Level (LS Level)
This is the amount of “boost” (increase) or
“cut” (decrease) of the low-frequency
shelving filter: -15.0 to +8.0 dB.
Low Shelf Frequency (LS Freq)
This is the frequency of the low-frequency
shelving filter: 40–630 Hz (default: 630 Hz).
PEQ Level
This is the amount of “boost” (increase) or
“cut” (decrease) of the mid-range
parametric equalization band: -15.0 to +8.0
dB.
PEQ Frequency (PEQ Freq)
This is the frequency of the mid-range
parametric equalization band: 40 Hz – 16
kHz (default: 630 Hz).
PEQ Bandwidth (PEQ Band)
This is the bandwidth of the mid-range
parametric equalization band: 0.300–
4.000 oct (octaves) (default: 0.500 oct).
Bekijk gratis de handleiding van Rane Zonetech, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Rane |
| Model | Zonetech |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2241 MB |
