Radial Engineering Workhorse Shuttle handleiding
Handleiding
Je bekijkt pagina 6 van 12
Radial Engineering Ltd.
Shuttle™ 500 Module
True to the Music
®
4
USING THE LOOPS
The Shuttle can be used in any standard 500 series rack. There are some added features
that Workhorse users can enjoy. The easiest way to discover the Shuttle’s functionality is to
go right to applications. This way, you can determine a need and then connect the Shuttle
to address it.
Balanced Patch Point
Professional level (+4dB) balanced studio devices are usually much quieter than unbalanced
devices and thus preferred by recording engineers. Often, particular processors will be
brought into the studio for special effects or maybe mastering. Patching these into a studio
setup usualy requires pulling racks apart, disconnecting cables and so on.
The Shuttle makes this process easy by allowing you to connect the output from your
workstation or other 500 series module to the XLR inputs on the Shuttle (via your 500 series
rack or via the FEED switch on the Workhorse) and then using the ¼” TRS connectors on the
front panel to route the signal to and from the effect. The Shuttle’s output can then be sent
back to your workstation or to the Workhorse mixer. Use the insert switch to turn on or off the
effect for quick comparisons between the wet and dry signals.
BALANCED PATCH POINT USED IN
AN OLDER 500 SERIES RACK
BALANCED PATCH POINT USED IN
THE RADIAL WORKHORSE RACK
ON
ON
MONO
2
3
41
LEVEL
CLIP
PAN
Made in Canada
LEVEL
ON
6
78
5
LEVEL
MAIN
MON
48V PHANTOM
+16V / -16V
LEVEL
CLIP
PAN
ON
LEVEL
CLIP
PAN
ON
LEVEL
CLIP
PAN
PAN PANPANPA N
ON
LEVEL
CLIP
LEVEL
ON
LEVEL
CLIPON
LEVEL
CLIPON
LEVEL
CLIPON
MIX BUSS
WORKHORSE MIXER
Tip
Ring
Tip
Ring
Sleeve
Sleeve
Pin-1
Pin-2
Pin-3
Female XLR
Shield
Tip
Tip
Sleeve
Sleeve
Pin-1
Pin-2
Pin-3
Female XLR
Shield
Sleeve
¼” TRS PHONE to XLR BALANCED WIRE DIAGRAM
¼” PHONE to XLR UNBALANCED WIRE DIAGRAM
Bekijk gratis de handleiding van Radial Engineering Workhorse Shuttle, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Workhorse Shuttle |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1828 MB |
