Radial Engineering Switchbone V2 handleiding
Handleiding
Je bekijkt pagina 5 van 20
Switchbone V2
Radial Engineering Ltd.
3
15
14
16 17 18 19 20 21
14. SLINGSHOT CIRCUIT: Lets you send a on-off type command to
external devices via a ¼” cable. The Slingshot may be activated
using the BOOST or the TOGGLE footswitches.
15. CIRCUIT: Sets the Slingshot to latching or pulse modes.
16. CONTACT: Sets the Slingshot contact closure to normally open or
normally closed.
17. GAIN: Sets the boost output level from 0dB to +18dB.
18. SELECT: Assigns the BOOST footswitch to MUTE, GAIN only or
GAIN + MID boost.
19. MID: Variable control, delivers up to 12dB of mid boost for soloing.
20. ADJUST / PRESET: Selects buffer between the unity gain setting
or the user-adjustable level.
21. DRAG: Variable control is used to set the load that is applied on
the pickup from 22K to 1 Meg.
Bekijk gratis de handleiding van Radial Engineering Switchbone V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Switchbone V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3119 MB |
