Radial Engineering Switchbone V2 handleiding

Niet gecategoriseerd

Radial Engineering

20 pagina's

PDF beschikbaar

Handleiding

Switchbone V2

Radial Engineering Ltd.

OVERVIEW

The Switchbone V2 is a multi-purpose buffer, switcher, power booster

and performance enhancer all in one. The best way to approach it is to

break each section down into modules and then bring them together in

your mind to suit your setup.

Input buffer and Drag control

In order to minimize switching

noise and signal loss, the

Switchbone V2 is active. In other

words, it employs a buffer to

amplify and manage the signal

before the switching occurs. To

minimize artefact and harshness, a 100% discrete class-A buffer is

employed. This is augmented with Drag™ control load correction to

allow the guitarist to precisely adjust the load on the pickup for the most

natural tone. A Baseline™ level control lets you increase the buffer drive

circuit to hit your amp harder or compensate for extra long cables. This

is particularly effective when using older ampliers that do not have input

and master level controls.

WARNING

Only connect electrical equipment that is properly grounded with a 3-prong AC plug.

Older amps with 2-prong plugs should be serviced before using them with any amp

switcher. An improperly grounded amp can be a very dangerous thing and never

should be used in multi-amp setups.

Radial Engineering takes no responsibility for how the Switchbone V2 is connected or

used. It is the user’s full responsibility to ensure that proper electrical connections are

maintained on all equipment connected to the Switchbone V2 and that proper building

electrical codes have been followed wherever the Switchbone V2 is used.

Note that damage to the Switchbone V2 or other connected equipment caused by

improper wiring or improperly grounded equipment is not covered under the warranty.

GUITAR

BUFFER GAIN BOOST

OUT-A

OUT-B

OUT-C

(TUNER)

REMOTE

MID BOOST

Bekijk gratis de handleiding van Radial Engineering Switchbone V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.