Radial Engineering Switchbone V2 handleiding
Handleiding
Je bekijkt pagina 4 van 20
Switchbone V2
Radial Engineering Ltd.
2
FEATURES
9
1
2 3 4 5 6 7 8
10 11 12 13
1. 15VDC: Connection for the power supply.
2. SLINGSHOT: Contact closure output used to activate external
devices.
3. TUNER/OUT-C: Isolated ¼” output used to feed a tuner or a 3rd
guitar amplier.
4. 180º: Polarity reverse switch, used to phase-align OUT-B and C.
5. OUT-B: Isolated ¼” output used to feed the signal to your second
guitar amplier.
6. LIFT: Ground lift switch used to eliminate hum and buzz.
7. OUT-A: Direct ¼” output used to feed your primary amplier.
8. INPUT: Standard ¼” input used to connect your guitar to the
Switchbone V2.
9. BOTH / OUT-C: Recessed switch sets the footswitch function to
either activate both A and B amps, or turn on amp C.
10. BOTH: Footswitch used to activate both A and B amps, or turn on
amp C.
11. TOGGLE: Footswitch used to select between amps A or B.
12. BOOST: Footswitch used to activate the power booster.
13. TOGGLE / BOOST: Recessed switch to select which footswitch is
used to activate external devices via the SLINGSHOT.
Bekijk gratis de handleiding van Radial Engineering Switchbone V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Radial Engineering |
| Model | Switchbone V2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3119 MB |
