Rademacher RolloTube S-line Zip DuoFern SLDZM handleiding

Niet gecategoriseerd

Rademacher

64 pagina's

PDF beschikbaar

Handleiding

...the motor fails to start?

Possible cause:

◆ The mains voltage is not available.

Solution:

◆ Check the power with a meter to ensure that the

supply voltage (230 V) is available and check the

wiring.

◆ Observe especially the information relating to

impermissible connection types.

...the wiring is incorrect?

Possible cause:

◆ The control lines are mixed up.

Solution:

◆ Disconnect the lead from the mains and ex-

change the wires for L1 and L2 .

12. What to do if... ?

...the tubular motor stops between the two end

points during normal operation?

Possible cause:

◆ The thermal protection system has triggered.

Solution:

◆ Wait approx. 20 minutes until the motor has

cooled down.

...the tubular motor stops after a short period of

time during the setting and test procedures?

Possible cause:

◆ The adapter (4) may have slipped oﬀ the magnetic

ring (5) on the drive head (3).

Solution:

◆ Check that the adapter (4) sits ﬂush with the drive

head (3) and is fully inserted in the winding shaft

(12).

◆ Slide the adapter (4) so that it is ﬂush with the drive

head (3) and then press the tubular motor into the

winding shaft (12) so that the adapter (4) is fully

inserted in the winding shaft, see ﬁgures [ 5 / 10 ].

Re-adjust the end points if necessary, see page

55.

...the tubular motor stops when the screen

is lowered?

Possible cause:

◆ The motor must push the screen down because

the winding shaft (12) is not running smoothly.

Solution:

◆ Check/restore the free movement of the screen or

consult a specialist company.

... the tubular motor does not stop after tight-

ening the screen when the lower end point is

set automatically but starts up again?

Possible cause:

◆ The tubular motor may be over-dimensioned.

Solution:

◆ The lower end point must be set manually in this

case.

... the tubular motor cannot raise the lowered

screen again?

Possible cause:

◆ The tubular motor may be under-dimensioned.

Solution:

◆ Use a tubular motor with a more powerful driv-

ing force.

Bekijk gratis de handleiding van Rademacher RolloTube S-line Zip DuoFern SLDZM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.