Rademacher RolloTube S-line Zip DuoFern SLDZM handleiding

Niet gecategoriseerd

Rademacher

64 pagina's

PDF beschikbaar

Handleiding

11. Reloading the factory settings

Self-learning mode is active again after loading the

factory settings.

Notes for carrying out the setting

◆ Use the new universal setting cable (13) avail-

able from a specialist retailer.

◆ The tubular motor may not be in operation.

Factory settings:

End points: no end points stored

Self-learning mode: activated

Blockage detection: activated

Obstacle detection: activated

Jog mode with a

1-pole button: deactivated

When using the universal setting cable (20)

3. Switch oﬀ the mains power and reset the original

connection in accordance with the connection

diagram [ 19 to 21 ] on pages 52 and 53 if you

have carried out the setting with the universal set-

ting cable.

1. Button 3 - ON/SET

First, switch on the continuous phase.

ON/

SET

III

2. Button 1 - Switch to the desired direction of travel

(I or II)

> while simultaneously (within one second) press-

ing and holding

Press and hold button 2 (set button III) until the

tubular motor conﬁrms this by brieﬂy running up

and down (approx. 5 seconds).

After that the factory settings are loaded.

Subsequently:

◆ Release button 2 (set button III)

◆ Button 1 (I/II) in the centre position

◆ Deactivate button 3 (ON/SET)

5 sec.

Bekijk gratis de handleiding van Rademacher RolloTube S-line Zip DuoFern SLDZM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.