Rademacher RolloTube S-line Zip DuoFern SLDZM handleiding

Niet gecategoriseerd

Rademacher

64 pagina's

PDF beschikbaar

Handleiding

13. Technical speciﬁcations

Motor series: SLDZS xx/xx

SLDZM xx/xx

Nominal torque Nm 6 10 10 20 30 40 50

No-load speed rpm 28 16 16 16 16 16 12

Nominal voltage V 230 230 230 230 230 230 230

Frequency Hz 50 50 50 50 50 50 50

Nominal power W 121 121 112 145 191 198 205

Current consumption A 0.53 0.53 0.49 0.64 0.83 0.86 0.89

On-period (KB) min. 4 4 4 4 4 4 4

Number of wires 5 5 5 5 5 5 5

Core cross section mm

0.75 0.75 0.75 0.75 0.75 0.75 0.75

Connecting cable (rubber) m 3 3 3 3 3 3 3

End switching range:

(number of revolutions.)

rev. 112 64 64 64 64 64 48

Insulation class H H H H H H H

Protection class I I I I I I I

Protection type in accordance with VDE 700 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44

Motor length without bearing mm 485 485 487 487 546 546 546

Tube diameter mm 35 35 45 45 45 45 45

Sound pressure level (LpA) dB(A) ≤ 70 ≤ 70 ≤ 70 ≤ 70 ≤ 70 ≤ 70 ≤ 70

Transmission frequency MHz 434.5 434.5 434.5 434.5 434.5 434.5 434.5

Max. transmission power mW 10 10 10 10 10 10 10

Approx. range

- In a building

(depending on the building structure)

m 30 30 30 30 30 30 30

- Outdoors m 100 100 100 100 100 100 100

Number of parallel tubular motors that

can be connected in parallel (when using

RADEMACHER controllers,

e.g. Troll Comfort)

3 3 2 2 2 2 2

In order to ensure trouble-free operation of

RADEMACHER tubular motors with KNX/EIB actua-

tors, the following parameters must be set prior to

commissioning:

Transient operation

If possible, transient operation (slat adjustment)

should be switched oﬀ.

e.g. Mode for transient operation

Time: = 0 ms

14. Conﬁguration of KNX/EIB actuators for RADEMACHER tubular motors

If transient operation cannot be deactivated

from within the software application, ...

...then you must ensure that the time between

transient operation and long-term operation on the

key sensor is less that the time between transient

operation and long-term operation on the actuator.

This will ensure that transient switch-oﬀ of the actua-

tor is prevented when holding the sensor key down.

Long-term operation

The motor must be switched oﬀ at the latest after

180 seconds.

e.g. Basis for long-term operation

Basis: = 2.1 s

Factor: = 86

= (2.1 s x 86 = 180.6 s)

Bekijk gratis de handleiding van Rademacher RolloTube S-line Zip DuoFern SLDZM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.