PreSonus Worx Control handleiding
Handleiding
Je bekijkt pagina 19 van 35
17
5 Customizing Speaker Settings
5.3 Customization Controls
Worx Control
Software Reference Manual
5.3.1 Level Adjustment
The Volume control consists of four elements:
• On/Off switch. By default, level control is off. To enable it, click the
On/Off switch.
• Level readout. This displays the input level for the onboard DSP. You can also
manually enter the level in decibels you wish to set by clicking in this field.
• Fader. This controls the level of your amplifier.
• 0.2 dB increment/decrement buttons. Use these buttons to make fine
adjustments to your amplifier level.
5.3.2 Alignment Delay
Controls the output delay for your loudspeaker. You can delay your loudspeaker up
to 800 ms in 0.1 ms increments.
The Alignment Delay control consists of four elements:
• On/Off switch. By default, alignment delay is off. To enable it click the
On/Off switch.
• Time readout. This displays the delay time in milliseconds. You can also
manually enter the time in milliseconds you wish to set by clicking in this field.
• Fader. This controls the alignment-delay time for your loudspeaker in whole
milliseconds. Note: Do not make drastic changes to the alignment delay time while
passing audio through your loudspeaker.
• 0.1 ms increment/decrement buttons. Use these to make fine adjustments to
your loudspeaker’s delay time.
Power User Tip: The alignment delay allows you to align sources that are physically set
apart from one another, such as a center-fill speaker that is reproducing the summed
stereo signal in a front-of-house system. By using fine output-delay adjustments on the
center-fill speaker and carefully setting the level, the entire system can be in phase,
creating a seamless transition so that the audience can’t hear where either main speaker
ends and the center-fill begins.
5.3.3 Limiter
The Limiter control consists of four elements:
• On/Off switch. By default, the limiter is off. To enable it click the On/Off switch.
• Threshold readout. This displays the set limiter threshold. You can also manually
enter the threshold in decibels you wish to set by clicking in this field.
• Fader. This controls the threshold of the limiter. When the signal’s amplitude
(level) exceeds the threshold setting, the limiter will engage. The threshold can
be set from -28 to 0 dB.
• 0.5 dB increment/decrement buttons. Use these buttons to make fine
adjustments to the limiter threshold.
Note: This is not your amplifier’s protection limiter.
Bekijk gratis de handleiding van PreSonus Worx Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Worx Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4962 MB |
