PreSonus Worx Control handleiding
Handleiding
Je bekijkt pagina 18 van 35
16
5 Customizing Speaker Settings
5.3 Customization Controls
Worx Control
Software Reference Manual
5.2.3 Global Group Controls
Besides Dynamics, EQ, Level, and Alignment Delay, the following Global Group
controls are available.
1
2
3
4
5
6
1. Mute. Mutes every loudspeaker in the group.
2. High Pass Filter. Sets the threshold of the group high pass filter.
3. Preset. Selects applies a factory preset. See Section 7 for preset functions for
each supported loudspeaker model.
4. Input. Switches the Source Input for every loudspeaker in the group. Three input
modes are provided:
• Dante Only. This mode disables the analog inputs on your amplifier
whether or not it is on the Dante network.
• Analog Only. This mode disabled the Dante Receive channels to your
amplifier whether or not it is connected to a Dante network. When a Dante
network is available, the Analog Input on your amplifier can be sent through
its Dante Transmit channels.
• Analog Failover. By enabling Analog Failover, you can use the analog
connection on the amplifier as backup. When no Dante sync is detected,
your loudspeaker will automatically switch to the analog inputs. This is the
default setting.
5. Dante Network Status. The indicator displays the status of the Dante network.
This indicator allows you to easily see whether loudspeakers in the group
connected to and communicating with your Dante network. When the Dante
network is available for every loudspeaker in the group, the Dante Lock indicator
will illuminate white. If no Dante network connection is detected for any
loudspeaker in the group, the Dante Lock indicator will illuminate red. Use the
Group Monitor page to troubleshoot the Dante network connectivity for each
loudspeaker in the group.
6. Factory Reset. Resets all parameters for every loudspeaker in the group to the
default setting.
The Level, Alignment Delay, Limiter, Compressor, and EQ controls are identical
whether you’re editing a loudspeaker group or an individual loudspeaker.
See Section 5.3.
5.3 Customization Controls
Whether you are customizing each loudspeaker individually or optimizing the
performance of an entire loudspeaker group, the following options are available on
both the Speaker Edit and Group Edit pages.
Bekijk gratis de handleiding van PreSonus Worx Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Worx Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4962 MB |
