PreSonus UC Surface handleiding
Handleiding
Je bekijkt pagina 19 van 75
16
3 Fat Channel Controls
3.3 Equalizer
UC Surface
Reference Manual
10. Key Filter. Sets the frequency at which the compressor will engage.
The compressor will still process the entire frequency range, but
it is only engaged when the specied frequency is present.
11. Compressor Makeup Gain. Sets the amount of makeup gain for the selected
channel or output bus. When compressing a signal, gain reduction usually
results in an overall attenuation of level. The gain control allows you to restore
this loss in level and readjust the volume to the pre-compression level (if
desired). You can adjust Makeup Gain from 0 dB (no gain adjustment) to +28 dB.
12. Input Meter (Series III only). Displays the input signal to the compressor.
13. Compressor Graph. This graph shows the point at which the
compressor threshold aects the signal. You can use this graph to
adjust the threshold or use the dedicated Threshold control (#6).
14. Key Source (Series III only) and Key Listen. Sets the Key
Source for the Compressor and allows you to monitor it.
15. Compressor Type (Series III only). This drop-down menu allows
you to select the compressor type for the current channel.
3.3 Equalizer
To view the controls for the parametric EQ, click on the Equalizer tab.
1. EQ > Compressor. This button moves the EQ before the Compressor.
2. Equalizer On/O. Turns the EQ on or o for the selected channel.
3. EQ Graph. This graph shows overall EQ curve.
4. EQ Frequency. Adjusts the center frequency of each band.
5. EQ Gain. Sets level of the center frequency from -15 to +15 dB.
6. Q. Sets the Q for each band. The Q is the ratio of the center frequency to the
bandwidth. When the center frequency is constant, the bandwidth is inversely
proportional to the Q, so as you raise the Q, you narrow the bandwidth.
7. Input Meter (Series III only). Displays the pre-Fat Channel input signal.
8. Low Shelf EQ On/O. Enabling the Low Shelf button turns the Low band
into a shelving EQ. A low shelving EQ is like a bass-control knob on a stereo.
In this mode, the Center Frequency control selects the shelving frequency.
9. EQ Band Select. Opens the controls for the selected EQ band.
1
2
3
4
5
6
7
8 9 10
11
12
13
14
15
Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | UC Surface |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14432 MB |
