PowerWalker Solar Inverter 5000 ZRO Handleiding (84 Pagina's)

Handleiding

21

L1 phase

When the units are operated in

3-phase application, please

choose “3PX” to define each

inverter.

It is required to have at least 3

inverters or maximum 9

inverters to support three-phase

equipment. It’s required to have

at least one inverter in each

phase or it’s up to four inverters

in one phase. Please refers to

5-2 for detailed information.

Please select “3P1” in program

28 for the inverters connected to

L1 phase, “3P2” in program 28

for the inverters connected to L2

phase and “3P3” in program 28

for the inverters connected to L3

phase.

Be sure to connect share current

cable to units which are on the

same phase.

Do NOT connect share current

cable between units on different

phases.

L2 phase

L3 phase

29

Low DC cut-off voltage:

 If battery power is only

power source available,

inverter will shut down.

 If PV energy and

battery power are

available, inverter will

charge battery without

AC output.

 If PV energy, battery

power and utility are all

available, inverter will

transfer to line mode

and provide output

power to loads.

Default setting: 42.0V

If self-defined is selected in

program 5, this program can be

set up. Setting range is from

40.0V to 54.0V. Increment of

each click is 0.1V. Low DC cut-off

voltage will be fixed to setting

value no matter what

percentage of load is connected.

32 Bulk charging time

auto-charging time (default)

5min

If “User-Defined” is selected in program 05, this program can be

set up. Setting range is from 5min to 900min. Increment of each

click is 5min. Otherwise, Keeping auto-charging time.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 5000 ZRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.