Phoenix Contact TC MOBILE I/O X200-4G AC handleiding

Niet gecategoriseerd

Phoenix Contact

82 pagina's

PDF beschikbaar

Handleiding

TC MOBILE I/O...4G

32 / 82 Phoenix Contact

107812_en_08

4.3.5 Messages

Alarm messages

The device sends alarm messages as an SMS or email. Emails are sent to an SMTP server.

The emails can be sent without encryption or with SSL encryption.

You are free to choose the text of the alarm message and also to add variables.

Example:

“... Input DI1 has the state: #DI1#...”

(#DI1# = variable)

Firmware 2.x supports the following variables:

– Device name

– Device serial number

– Device IMEI number

– Time stamp of the current time

– Status of all four digital inputs (high = 1, low = 0)

– Status of the individual digital inputs (1 ... 4)

– Value and unit of the individual analog inputs (1 ... 2)

– Status of all four relay outputs

– Status of the individual relay outputs (1 ... 4)

– Variables for cellular network diagnostics

– Number of sent SMS messages

– Data volumes currently used

– Current grid operator

Periodic status messages

In addition to alarm messages, the device can also send periodic status messages. The

interval can be set to between five minutes and one month.

The app can refresh itself every minute.

Status message in the event of a power failure

The device can send a freely configurable SMS to a participant in the contact list when

switched off, in the event of a power failure, or when starting up. The SMS is sent to the

selected participant once. It is not possible to send an email because the power con-

sumption is too high.

Status requests via SMS

You can request the current status of the inputs and outputs via SMS.

Bekijk gratis de handleiding van Phoenix Contact TC MOBILE I/O X200-4G AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.