Phoenix Contact TC MOBILE I/O X200-4G AC handleiding

Niet gecategoriseerd

Phoenix Contact

82 pagina's

PDF beschikbaar

Handleiding

Configuration

107812_en_08 Phoenix Contact 33 / 82

The following table lists the standard SMS commands and messages. They are preset for

initial startup or following a reset.

NOTE: Unauthorized access

For security reasons, we recommend to change the SMS commands.

You can also change the SMS messages if a different language is required or to add more

details to the messages, for example.

Tabelle 4-1 Standard SMS commands and messages

Topic Event Text Command = 

Message = 

Access data No SMS commands or messages -

Contacts Confirmation: contact edited "Editing of phonebook was successful!"



Confirmation for message chain "QUIT"



Inputs DI1 - Text for positive edge "DI1 has switched on positive edge"



DI1 - Text for negative edge "DI1 has switched on negative edge"



DI2 - Text for positive edge "DI2 has switched on positive edge"



DI2 - Text for negative edge "DI2 has switched on negative edge"



DI3 - Text for positive edge "DI3 has switched on positive edge"



DI3 - Text for negative edge "DI3 has switched on negative edge"



DI4 - Text for positive edge "DI4 has switched on positive edge"



DI4 - Text for negative edge "DI4 has switched on negative edge"



AI1 - Wire break "Wire break on AI1"



AI1 - Exceeding the upper threshold "Exceeded the upper tolerance thres-

hold at AI1"



AI1 - Falling below the upper threshold "Undercut the upper tolerance thres-

hold at AI1"



AI1 - Falling below the lower threshold "Undercut the lower tolerance thres-

hold at AI1"



AI1 - Exceeding the lower threshold "Exceeded the lower tolerance thres-

hold at AI1"



AI2 - Wire break "Wire break on AI2"



AI2 - Exceeding the upper threshold "Exceeded the upper tolerance thres-

hold at AI2"



AI2 - Falling below the upper threshold "Undercut the upper tolerance thres-

hold at AI2"



AI2 - Falling below the lower threshold "Undercut the lower tolerance thres-

hold at AI2"



AI2 - Exceeding the lower threshold "Exceeded the lower tolerance thres-

hold at AI2"



Confirmation: analog tolerances edited via

SMS

"Editing of analog tolerances was suc-

cessful!"



Bekijk gratis de handleiding van Phoenix Contact TC MOBILE I/O X200-4G AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.