Phoenix Contact TC MOBILE I/O X200-4G AC handleiding

Niet gecategoriseerd

Phoenix Contact

82 pagina's

PDF beschikbaar

Handleiding

Configuration

107812_en_08 Phoenix Contact 31 / 82

Scalable analog inputs (TC MOBILE I/O X200-4G only)

The device can send up to four messages per analog input:

– Exceeding the upper tolerance

– Falling below the upper tolerance

– Exceeding the lower tolerance

– Falling below the lower tolerance

You can use the analog inputs as a voltage input (0 V ... 60 V) or as a current input

(0 mA ... 20 mA or 4 mA ... 20 mA). When a signal from 4 mA ... 20 mA is monitored, the

device can report wire break.

Figure 4-8 Scalable analog inputs

Relay

The device has four relays (N/O contacts). You can open or close the relays via a tele-

phone call or an SMS. A command can also switch several relays at the same time. For

security reasons, incoming emails are not supported.

If a relay was closed, it can automatically re-open itself after a freely selected waiting pe-

riod between one second and 999 hours. The device can send a confirmation SMS to the

recipient after a relay is opened or closed.

If the current fails or if the device restarts, the relay opens.

Bekijk gratis de handleiding van Phoenix Contact TC MOBILE I/O X200-4G AC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.