Phoenix Contact FL PN/PN SDIO-2TX/2TX Handleiding (94 Pagina's)

Handleiding

For your safety

8220_en_06 PHOENIX CONTACT 15

– Acknowledging block error messages in the application

– Removing startup inhibits for safety functions

Observe your safety logic during programming/configuration:

– Switching from the safe state (substitute value = 0) to the operating state can generate

an edge change (zero/one edge).

– In the safety logic, take measures to prevent this edge change resulting in unexpected

machine/system startup or restart.

Also observe the device behavior during the processing of zero telegrams in particular

(see section B 3 on page 80).

Please note that the safe PROFINET gateway transmits the safe process data from one

PROFINET system to the other without any further measures/changes.

1.6 Directives and standards

The manufacturers and operators of machines and systems, in which the FL PN/PN SDIO-

2TX/2TX is used, are responsible for adhering to all applicable directives and legislation.

For the standards observed by the device, please refer to the certificate issued by the

approval body and the EC declaration of conformity. These documents are available on the

Internet at phoenixcontact.net/products

.

Bekijk gratis de handleiding van Phoenix Contact FL PN/PN SDIO-2TX/2TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.