Phoenix Contact AXL F BP SE4 handleiding
Handleiding
Je bekijkt pagina 22 van 40
UM EN AXL F SYS DIAG
22 / 38 Phoenix Contact
8663_en_08
0A07 Object does not exist. Check the invocation.
0A08 Code of failed service Maximum number of permitted parallel SM services
exceeded. (Processing conflict)
Wait for the previously
invoked service to be
completed and try again.
0A0C Unknown Variable_ID Invocation of Set_Value or Read_Value with a Vari-
able_ID that contains an unknown code.
Check the invocation.
0A0D A firmware error occurred. Restart the device. If the
problem persists, please
contact Phoenix Contact.
0A0E Current state of the local
bus master
Energy-saving mode cannot be activated in the current
state of the local bus master.
Set the local bus master
to the required state.
0A18 Invalid Used_Attributes
parameter
A reserved bit is set in Used_Attributes. Check the parameters.
0A19 Number of bus devices The end of the frame was exceeded when accessing
the configuration or line 0 was accessed.
Check access.
0A1A Invalid Frame_Reference
(if specified)
The frame reference specified for the service does not
exist.
Check the parameters.
0A1C Number of connected de-
vices
Maximum number of devices exceeded. Reduce the bus configu-
ration.
0A2F Number of devices is zero. Connect the device and
check the connection.
0A51 Only a frame reference from 1 to 254 is permitted. Only the value 1 is per-
mitted at present.
0A54 The maximum number of permissible I/O points was
exceeded.
Reduce the number of
I/O points to the maxi-
mum number.
For the exact number,
please refer to the docu-
mentation for your con-
troller.
0A60 A configuration frame could not be assigned. Create the configuration
frame.
0A70 A reserved bit is set in the Diag Info attribute. Check the parameters.
0A73 Device number Device with an unsupported chip version present in the
local bus.
Replace the device.
0A74 Device number Device from an unsupported manufacturer present in
the local bus.
Replace the device.
Table 3-1 Error codes for user errors [...]
Code
(hex)
Additional code Meaning Remedy
Bekijk gratis de handleiding van Phoenix Contact AXL F BP SE4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | AXL F BP SE4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3843 MB |
