Phoenix Contact AXL F BP SE4 handleiding
Handleiding
Je bekijkt pagina 10 van 40
UM EN AXL F SYS DIAG
10 / 38 Phoenix Contact
8663_en_08
D Red/
yellow/
green
Connected Flashing
yellow
1 Hz
The device is not (yet) part of the active configuration.
Backplane:
During power up: The Smart Element configured for the backplane
slot before the slot with the flashing yellow D LED is missing from
this slot or it is passive.
1)
Flashing
yellow
8 Hz
2)
Backplane:
Configuration difference
Possible causes:
– The Smart Element has lost the connection to the backplane or
has been removed.
– An unconfigured Smart Element has been plugged into the slot.
Flashing
yellow/red
1)
Backplane:
During operation:
The Smart Element in the backplane slot before the slot with the
flashing yellow/red D LED has lost the connection to the backplane.
Not connected Flashing
red
The device is ready to operate, but there is no connection to the pre-
vious device.
Reset Red on The device is ready to operate, but has lost the connection to the
head of the station (bus coupler or controller).
Backplane:
– One LED: The local bus has been interrupted. The flashing red
LED D indicates the location of the error in the station.
– All LEDs, after power up: There is an unconfigured Axioline F
module or Smart Element in the station.
Power down Off Device is in (power) reset.
– The supply voltage is not present.
– Energy-saving mode is active.
– Backplane: The slot is empty or the inserted Smart Element is
passive.
1)
E1 Red/
yellow
Device error or warning
Indicates messages that apply to the entire device.
Red on Error (priority 1)
Yellow on Warning (priority 2)
E2 Red/
yellow
I/O error, channel error or warning (group message)
Indicates messages that only apply to a single channel.
Red on Error (priority 1)
Yellow on Warning (priority 2)
Table 2-3 D and E LEDs on the power connectors of the I/O modules and on Axioline F backplanes [...]
Designa-
tion
Color Meaning State Description
Bekijk gratis de handleiding van Phoenix Contact AXL F BP SE4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Phoenix Contact |
| Model | AXL F BP SE4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3843 MB |
