Philips 7300 series 50PUG7300 handleiding

Televisie

Philips

67 pagina's

PDF beschikbaar

Handleiding

Power and Energy

Set the Power-on behavior

 (Home) > Settings > General settings > Power and

energy > Power-on behavior

Set the TV to stay on the Home screen or the Last

source when you power on the TV.

Set screen off to save energy consumption

 (Home) > Settings > General settings > Power and

energy > Screen off

Select Screen off, the TV screen is switched off. To

switch the TV screen back on, press any key (except

 Volume + or -, Play , Pause  and 123 key) on the

remote control.

Set the TV to switch to Standby automatically after a

preset time

 (Home) > Settings > General settings > Power and

energy > Sleep timer

Set the TV to switch to Standby automatically after a

preset time. You can set the time to up to 180 minutes

in increments of 10 or 30 minutes. If set to Off, the

sleep timer is switched off. You can always switch off

your TV earlier or reset the time during the countdown.

Set TV switch off timer

 (Home) > Settings > General settings > Power and

energy > Switch off timer

Set the Switch off timer for the TV to switch off

automatically to save energy. The setting Off

deactivates automatic switch off.

• TV switches off if receiving a TV signal but you don't

press a key on the remote control during a 4 hour

period.

• TV switches off if not receiving a TV signal nor a

remote control command for 10 minutes.

• If you use the TV as a monitor or use a digital receiver

to watch TV (a Set-Top Box - STB) and you do not use

the TV remote control, you should deactivate automatic

switch off by setting it to Off.

Set timer to switch off automatically when TV has no

signal

 (Home) > Settings > General settings > Power and

energy > No signal timer

Your TV switches off automatically if there is no signal

available after 10/15/20 minutes.

HDMI-CEC Connection - EasyLink

Connect HDMI CEC-compatible devices to your TV. You

can operate them with the TV remote control. EasyLink

HDMI CEC must be switched on, both on the TV and the

connected device.

Switch on EasyLink

 (Home) > Settings > General settings > EasyLink > On

Operate HDMI CEC-compatible devices with TV remote

control

 (Home) > Settings > General settings

> EasyLink remote control > On

Note:

- EasyLink might not work with devices from other

brands.

- The HDMI CEC functionality has different names

depending on the brand. Some examples are: Anynet,

Aquos Link, Bravia Theater Sync, Kuro Link, Simplink

and Viera Link. Not all brands are fully compatible with

EasyLink. Example HDMI CEC branding names are

property of their respective owners.

Apple AirPlay and HomeKit

Streaming contents via AirPlay

You can stream the media files from Apple devices to

your TV via AirPlay. Go to (Home) > Settings

> General settings > Apple AirPlay and HomeKit to

enter AirPlay and HomeKit Settings page and make

sure AirPlay is turned On. Your Apple device must be

connected to the same Wi-Fi home network as your TV

to stream contents.

Add your TV to Apple HomeKit

To add your TV to HomeKit and control your TV via

Apple devices:

1 - Go to (Home) > Settings > General settings >

Bekijk gratis de handleiding van Philips 7300 series 50PUG7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.