Philips 7300 series 50PUG7300 handleiding

Televisie

Philips

67 pagina's

PDF beschikbaar

Handleiding

store the profile. You can apply the current profile or

create other profiles, with a maximum of 3 profiles. You

can also Rename profiles or Remove profiles when

needed.

Dolby Atmos for Headphone

 (Home) > Settings > Sound > Dolby Atmos for

headphone

Switch On or Off the Dolby Atmos for Headphone

when Dolby Atmos content is available. Select Wired

headphones from Audio out setting, or connect a

Bluetooth® device to enjoy the Dolby Atmos sound

experience with your headphones.

Wireless and Networks

Home Network

To enjoy the full capabilities of your Philips Smart TV,

your TV must be connected to the Internet.

Connect the TV to a home network with a high-speed

Internet connection. You can connect your TV wirelessly

or wired to your network router.

Connect to Network

Wireless Connection

What You Need

To connect the TV to the Internet wirelessly, you need a

Wi-Fi router with a connection to the Internet. Use a

high-speed (broadband) connection to the Internet.

Make the Connection - Wireless

 (Home) > Settings > Wireless & networks > Wired or

Wi-Fi > Connect to network > Wireless (Wi-Fi)

1 - In the list of found networks, select on your wireless

network. If your network is not in the list because the

network name is hidden (you switched off the SSID

broadcast of the router), select Add New Network to

enter the network name yourself.

2 - Enter your encryption key. If you entered the

encryption key for this network before, you can

select OK to make the connection immediately.

3 - A message will be shown when the connection is

successful.

Turn Wi-Fi On or Off

 (Home) > Settings > Wireless & networks > Wired or

Wi-Fi > Wi-Fi On/Off

Wired Connection

What You Need

To connect the TV to the Internet, you need a

network router with a connection to the Internet. Use a

high-speed (broadband) connection to the Internet.

Make the Connection

 (Home) > Settings > Wireless & networks > Wired or

Wi-Fi > Connect to network > Wired

1 - Connect the router to the TV with a network cable

(Ethernet cable**).

2 - Make sure that the router is turned on.

3 - The TV constantly searches for the network

connection.

4 - A message will be shown when the connection is

successful.

If the connection fails, you can check the DHCP setting

of the router. DHCP should be turned on.

**To fulfill EMC regulations, use a shielded FTP Cat. 5E

Ethernet cable.

Wireless and Network Settings

Check the network

 (Home) > Settings > Wireless & networks > Wired or

Wi-Fi > Check the network

Check the network connection status.

View Network Settings

Bekijk gratis de handleiding van Philips 7300 series 50PUG7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.