Philips 7300 series 50PUG7300 handleiding

Televisie

Philips

67 pagina's

PDF beschikbaar

Handleiding

to select the output source you want to adjust.

Press Volume + or - to adjust the volume level of the

selected output source.

eARC

eARC setting

 (Home) > Settings > Sound > Advanced > eARC

Set eARC mode to Automatic or Off. HDMI eARC

(Enhanced Audio Return Channel) is an advancement

over the previous ARC. It supports the latest high-

bitrate audio formats up to192kHz, 24-bit,

uncompressed 5.1 and 7.1, and 32-channel

uncompressed audio.

HDMI eARC is only available on HDMI 1.

Digital Output Settings

Digital output settings are available for SPDIF output

(optical) and HDMI ARC sound signals.

Digital out format

 (Home) > Settings > Sound > Advanced > Digital out

format

Set the audio out signal of the TV to fit the sound

capabilities of the connected Home Theater System.

• Stereo (uncompressed): If your audio playback

devices have no multichannel sound processing, select

to only output stereo content to your audio playback

devices.

• Multichannel: Select to output multichannel audio

content (compressed multichannel sound signal) or

stereo audio content to your audio playback devices.

• Multichannel (bypass): Select to send the original

bitstream from HDMI ARC to the connected HDMI

sound system.

- Make sure your audio playback devices support Dolby

Atmos feature.

- SPDIF output (DIGITAL AUDIO OUT) will be disabled

when streaming Dolby Digital Plus content.

Digital out leveling

 (Home) > Settings > Sound > Advanced > Digital out

leveling

Adjust the loudness level from device which is

connected to digital audio output (SPDIF) or HDMI.

• Select More to have louder volume.

• Select Less to have softer volume.

Digital out delay

 (Home) > Settings > Sound > Advanced > Digital out

delay

For some Home Theater Systems, you might need to

adjust the audio sync delay to synchronize the audio to

the video. Select Off if a sound delay is set on your

Home Theater System.

Digital out offset (Only available when Digital out

delay set to On)

 (Home) > Settings > Sound > Advanced > Digital out

offset

• If you cannot set a delay on the Home Theater System,

you can set the TV to sync the sound.

• You can set an offset that compensates for the time

necessary for the Home Theater System to process the

sound of the TV picture.

• You can set the value from 0 to 60ms.

Hearing Profile

Hearing profile settings

 (Home) > Settings > Sound > Hearing profile.

Personalize your TV speakers sound

Hearing profile setting is for creating a personal profile

based on your hearing abilities by taking a hearing test.

You can choose your preferred sound settings so that

you can hear more clearly and experience better sound,

thereby enhancing your TV viewing experience.

How do I test my hearing and set up my hearing

profile?

Start the hearing test

from (Home) > Settings > Sound > Hearing profile

> Configure. Create your own hearing profile with a

short hearing test.

Before the test, you need to switch your current audio

out to TV speakers as the setup affects the TV speakers

only. The hearing test works best when carried out in

silence; make sure your environment is quiet when

testing.

Select Start and enter a profile name to start the test.

During the test:

• You will hear a beep sound increasing in volume.

• Press OK button when you hear the beep sound.

• Then, you will hear a beep sound decreasing in

volume.

• Press OK button when you don't hear the beep sound.

• The test will repeat 5 times with different tones.

Once the test is complete, your hearing test results will

be presented, and you can then select Save and exit to

Bekijk gratis de handleiding van Philips 7300 series 50PUG7300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.