Parkside PRMA 20-Li B2 handleiding
Handleiding
Je bekijkt pagina 20 van 229
PRMA 20-Li B2
■ 14
│
GB
│
IE
Using the appliance
Switching on and off (see figs. H + I)
Switching on
♦ Place the mower on a level surface.
♦ Raise the transparent cover r on the appliance
housing.
♦ Push the charged battery pack p along the
guide rail into the appliance. It clicks audibly
into place.
♦ Insert the contact key t into the opening
provided.
♦ Before switching the appliance on, make sure
that it is not in contact any objects.
♦ To switch on the appliance, press the release
button i and hold it down while pressing the
start lever 2.
♦ Let go the release button i.
Switching off
♦ To switch off, release the start lever 2.
WARNING! RISK OF INJURY!
■ After the appliance is switched off, the blade
d continues to rotate for a few seconds.
Do not touch the moving blade d. There is a
risk of personal injury.
Working with the lawnmower
Regular mowing stimulates the grass plant to pro-
duce more leaves, and at the same time causes
weeds to die off. Therefore, repeated mowing
causes the lawn to become denser and an uniform-
ly resilient lawn is created. The first cut is made
from about April onwards at a growth height of
70–80 mm. During the main vegetation period,
you should mow the lawn at least once a week.
♦ Push the appliance at walking pace in as
straight a path as possible. For seamless mowing,
the strips should always overlap by a few centi-
metres.
♦ Set the cutting height so that the appliance is
not overloaded. Otherwise the motor could be
damaged.
♦ Always work across the slope. Be extremely
careful when mowing backwards and when
dragging the appliance.
♦ Clean the appliance after every use as de-
scribed in the section "Cleaning, maintenance
and storage".
The difference between mowing and
mulching
When using the mulching kit o, the grass cuttings
are not collected in a catcher but shredded and
distributed on the lawn.
The nutrients contained in the lawn clippings are
thus broken down by soil organisms and form a
nutrient cycle. Mulched lawns therefore need to be
fertilised much less frequently.
As a rule of thumb, the lawn needs to be mowed
relatively often so that only small amounts of mulch
remain on the lawn.
Ideally, you should mulch the lawn at least once a
week and the mower should be set so that only
about 40% of the total height of the lawn is
mulched. If too mulch is left on the lawn (for exam-
ple, during the first lawn cut of the year or during
strong growth), use the grass catcher 8.
IB_446011_PRMA20-LiB2_LB8.indb 14 22.12.2023 09:45:55
Bekijk gratis de handleiding van Parkside PRMA 20-Li B2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PRMA 20-Li B2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27644 MB |
