Parkside PPFSA 40-Li C2 handleiding
Handleiding
Je bekijkt pagina 16 van 54
PPFSA 40-Li C2
GB
│
IE
│
NI
│
9 ■
b) Thoroughly inspect the area for wildlife where
the machine is to be used. Wildlife maybe in-
jured by the machine during operation.
c) Thoroughly inspect the area where the ma-
chine is to be used and remove all stones,-
sticks, wires, bones, and other foreign ob-
jects. Thrown objects can cause personal injury.
d) Before using the machine, always visually
inspect to see that the cutter or blade and the
cutter or blade assembly are not damaged.
Damaged parts increase the risk of injury.
e) Follow instructions for changing accessories.
Improperly tightened blade securing nuts or
bolts may either damage the blade or result in it
becoming detached.
f) The rated rotational speed of the blade must
be at least equal to the maximum rotational
speed marked on the machine. Blades running
faster than their rated rotational speed can
break and fly apart.
g) Wear eye, ear, head and hand protection.
Adequate protective equipment will reduce
personal injury by flying debris or accidental
contact with the cutting line or blade.
h) While operating the machine, always wear
safety footwear. Do not operate the machine
when barefoot or wearing open sandals. This
reduces the chance of injury to the feet from
contact with a moving cutter, line or blade.
i) While operating the machine, always wear
long trousers. Exposed skin increases the likeli-
hood of injury from thrown objects.
g) Keep bystanders away while operating the
machine. Thrown debris can result in serious
personal injury.
k) Always use two hands when operating the
machine. Holding the machine with both hands
will avoid loss of control.
l) Hold the machine by the insulated gripping
surfaces only, because the cutting line or
blade may contact hidden wiring. Cutting line
or blades contacting a “live” wire may make
exposed metal parts of the machine “live” and
could give the operator an electric shock.
m) Always keep proper footing and operate the
machine only when standing on the ground.
Slippery or unstable surfaces may cause a loss
of balance or control of the machine.
n) Do not operate the machine on excessively
steep slopes. This reduces the risk of loss of
control, slipping and falling which may result in
personal injury.
o) When working on slopes, always be sure of
your footing, always work across the face of
slopes, never up or down and exercise ex-
treme caution when changing direction.
This reduces the risk of loss of control, slipping
and falling which may result in personal injury.
p) Keep all parts of the body away from the
cutter, line or blade when the machine is
operating. Before you start the machine, make
sure the cutter, line or blade is not contacting
anything. A moment of inattention while operat-
ing the machine may result in injury to yourself
or others.
q) Do not operate the machine above waist
height. This helps prevent unintended cutter or
blade contact and enables better control of the
machine in unexpected situations.
r) When cutting brush or saplings that are under
tension, be alert for spring back. When the
tension in the wood fibres is released, the brush
or sapling may strike the operator and/or throw
the machine out of control.
s) Use extreme caution when cutting brush and
saplings. The slender material may catch the
blade and be whipped toward you or pull you
off balance.
t) Maintain control of the machine and do not
touch cutters, lines or blades and other haz-
ardous moving parts while they are still in
motion. This reduces the risk of injury from mov-
ing parts.
u) Carry the machine with the machine switched
off and away from your body. Proper handling
of the machine will reduce the likelihood of
accidental contact with a moving cutter, line or
blade.
Bekijk gratis de handleiding van Parkside PPFSA 40-Li C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PPFSA 40-Li C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6664 MB |
