Parkside PHSL 710 A1 handleiding
Handleiding
Je bekijkt pagina 12 van 64
GB
12
• If the cutting unit touches a foreign
object or the device starts to vibrate
abnormally, an immediate inspection
is required:
- examine for loose parts and tighten
these
- search for signs of damage
- replace damaged parts with
equivalent ones or have the device
repaired.
• Do not try to repair the device
by yourself unless you have
professional training. All work
not mentioned in this instruction
manual may only be performed
by our service centre. Many acci-
dents are caused by poorly maintained
appliances.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or re.
Assembly of the pole
saw
Pull out the power plug before carry-
ing out any work on the equipment.
Use only original parts.
1. Unpack the device and check it for
completeness.
B
Assembly of the middle
tubular shaft (9) (optional):
The long-shaft hedge trimmer can
be used optionally with or without
the middle tubular shaft (9).
2. Remove the cap (23) from the middle
tubular shaft (9).
Loosen the star wheel (11).
Slide the middle tubular shaft (9) onto
the tubular shaft on the appliance hous-
ing (12) in a slight rotating movement.
When doing so, the retaining knob
(10) locks into place. Fix the two tubu-
lar elements in place with the rotary
knob (11).
Only tighten the rotary knob
(11) by hand! The use of
maximum manual force will
damage the tubular shaft.
B
Assembly of the front tubular
shaft (6):
3. Remove the cap (23) on the front tu-
bular shaft (6). Loosen the star wheel
(8/11). Slide the front tubular shaft (6)
optionally onto the middle tubular shaft
(9) or onto the tubular shaft (12) on the
appliance housing in a slight rotating
movement. The safety button (7) locks
into place. Fix the two tubular elements
in place with the rotary knob (8/11).
Only tighten the rotary knob
(8/11) by hand! The use of
maximum manual force will
damage the tubular shaft.
C
4. Place the round handle (13) onto
the tubular shaft of the device hou-
sing (12). Fold on the counter-holder
(24) of the round handle and screw
it on together with the large washer
(25) and the rotary knob (26).
5. The assembly of the round handle (13)
depends on whether the central tube
shaft (9) is used or not.
Structure without central tube shaft (9):
The round handle (13) must be mount-
ed between the two soft handles (27).
Bekijk gratis de handleiding van Parkside PHSL 710 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PHSL 710 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7485 MB |
