Parkside PFDF 900 C3 handleiding
Handleiding
Je bekijkt pagina 10 van 162
GB / IE
|
5
d) Remove any adjusting key or wrench
before turning the power tool on.
A wrench or a key left attached to a ro-
tating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in un-
expected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair
and clothing away from moving parts.
Loose clothes, jewellery or long hair can
be caught in moving parts.
g) If devices are provided for the con-
nection of dust extraction and collec-
tion facilities, ensure these are con-
nected and properly used. Use of dust
collection can reduce dust-related haz-
ards.
h) Do not allow yourself to get lulled into
a false sense of security, and do not
ignore the safety regulations for power
tools, even if you are familiar with the
power tool after repeated use. A care-
less action can cause severe injury within
a fraction of a second.
4. Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your applica-
tion. The correct power tool will do the
job better and safer at the rate for which
it was designed.
b) Do not use the power tool if the
switch does not turn it on and o.
Any power tool that cannot be controlled
with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power
source and/or remove the battery
pack, if detachable, from the power
tool before making any adjustments,
changing accessories, or storing
power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e) Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may aect
the power tool’s operation. If dam-
aged, have the power tool repaired
before use. Many accidents are caused
by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to
bind and are easier to control.
g) Use the power tool, accessories and
tool bits, etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations dierent from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces
do not allow for safe handling and con-
trol of the tool in unexpected situations.
5. Service
a) Have your power tool serviced by
a qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool
is maintained.
IB_458729_PFDF900C3_LB8.indb 5IB_458729_PFDF900C3_LB8.indb 5 11.07.2024 11:34:5111.07.2024 11:34:51
Bekijk gratis de handleiding van Parkside PFDF 900 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PFDF 900 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18808 MB |
