Parkside PFDF 900 C3 handleiding
Handleiding
Je bekijkt pagina 9 van 162
4
|
GB / IE
General power
tool safety warnings
WARNING!
► Read all safety warnings, instruc-
tions, illustrations and specications
provided with this power tool. Failure
to follow all instructions listed below
may result in electric shock, re and/or
serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool
or battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explo-
sive atmospheres, such as in the
presence of ammable liquids, gases
or dust.
Power tools create sparks which may
ignite the dust or fumes.
c) Keep children and bystanders away
while operating a power tool. Distrac-
tions can cause you to lose control.
2. Electrical safety
a) Power tool plugs must match the out-
let. Never modify the plug in any way.
Do not use any adapter plugs with
earthed (grounded) power tools.
Unmodied plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplug-
ging the power tool. Keep cord away
from heat, oil, sharp edges or moving
parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When working outdoors with an elec-
trical power tool, always use exten-
sion cords that are also suitable for
outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of elec-
tric shock.
3. Personal safety
a) Stay alert, watch what you are doing
and use common sense when operat-
ing a power tool. Do not use a power
tool while you are tired or under the
inuence of drugs, alcohol or medica-
tion.
A moment of inattention while operating
a power tool may result in serious
personal injury.
b) Use
personal protective equipment.
Always wear safety goggles.Protective
equipment such as a dust mask, non-
skid safety shoes, hard hat or hearing
protection used for appropriate condi-
tions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the o-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
nger on the switch or energising power
tools that have the switch on invites ac-
cidents.
IB_458729_PFDF900C3_LB8.indb 4IB_458729_PFDF900C3_LB8.indb 4 11.07.2024 11:34:5111.07.2024 11:34:51
Bekijk gratis de handleiding van Parkside PFDF 900 C3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PFDF 900 C3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18808 MB |
