Parkside PDFW 120 B3 handleiding
Handleiding
Je bekijkt pagina 20 van 86
18 GB/IE/NI/CY
Use only grinding discs and brushes whose
imprinted speed rating is at least as high as
that on the type plate on the power tool.
Adjust the spark deflector occasionally to
compensate for wear on the disc. Ensure
that the distance between the spark
deflector and the disc is a small as possible
and is never more than 2mm.
Always leave the tool attached to the
spindle to reduce the risk of contact with the
rotating spindle.
Residual risks
Even if you operate this power tool properly,
there will still be residual risks. The following
risks can occur in the context of the design and
construction of this power tool:
a) Lung damage, if no suitable breathing
protection is worn.
b) Hearing damage, if no suitable hearing
protection is worn.
c) Damage to health caused by vibrations if
the product is used for extended periods or
is not properly used and maintained.
m
WARNING!
u The power tool creates an electro-
magnetic field during operation. This
field can, in certain circumstances, impair
active or passive medical implants.
To reduce the risk of fatal injuries, we
recommend that people with medical
implants consult their doctor and the
manufacturer of the medical implant
before operating this power tool.
Assembly
m
WARNING!
Switch off the product and dis-
connect it from the mains before
replacing attachments, cleaning and
when not in use.
Wear dust protection!
Unpacking the product
1. Take the product out of the packaging and
remove all packaging materials and plastic
wrappings.
2. Check to make sure that all listed parts are
included (see “Scope of delivery”).
3. Check whether the product and all parts
are in good condition, if any damage or
defect is detected, do not use the product,
but follow the procedure described in
chapter “Warranty”.
NOTE
u Always operate the product so that the
transparent screen and spark arrestor
assembly[1] as well as the work rest[]
are properly installed as required for
the grinding wheel[] and the buffing
wheel[2].
u The installation, removal and replacement
of accessories requires accessory tools,
which are not included in the scope of
delivery.
u Use an adjustable wrench and a
Torx screwdriver to perform product
adjustment and accessory replacement.
Accessories
To operate this product safely and correctly, the
following accessories, i.e. tools and accessory
tools, are necessary:
Adjustable wrench
Torx screwdriver
Clamps
Accessories and accessory tools are available
through your authorised dealer . When buying
always consider the technical requirements of
this product (see “Technical data”).
If you are not certain, ask a qualified specialist
and get advice from your trusted dealer.
Bekijk gratis de handleiding van Parkside PDFW 120 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDFW 120 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9931 MB |
