Parkside PDFW 120 B3 handleiding
Handleiding
Je bekijkt pagina 19 van 86
17GB/IE/NI/CY
Wear suitable clothing! Do not wear
loose clothing or jewellery that could get
caught in moving parts. Wear non-slip
footwear when working outdoors. If you
have long hair, wear a hairnet.
m
WARNING!
Wear eye protection!
Wear dust protection!
Connect the dust extraction device!
If there are connections for dust extraction
and collection, make sure that these are
connected and used properly.
Do not use the cord for purposes
for which it is not intended! Do not
pull on the cord to unplug the power tool.
Protect the cord from heat, oil and sharp
edges.
Secure the workpiece! Use clamps or
a vice to hold the workpiece firmly in place.
This is much safer than simply holding it in
your hand.
Do not overreach! Keep both feet on
the ground an maintain your balance at all
times.
Maintain tools with care! Keep the
cutting tools sharp and clean to be able
to work better and more safely. Follow the
instructions on lubrication and exchanging
tools. Check the power cord regularly and
have it replaced by a certified specialist
if it is damaged. Check extension cords
regularly and replace them if they are
damaged. Keep the handles dry, clean and
free from oil and grease.
Unplug the appliance from the
mains socket! When the power tool is
not in use, before maintenance and when
changing tools.
Never leave any tool key attached!
Check that all keys and adjusting tools are
removed before switching the appliance on.
Avoid accidentally starting the
appliance! Ensure that the switch is
switched to off before inserting the plug into
the wall socket.
Use an extension cord for outdoor
use! Use only suitably certified and
labelled extension cords outdoors.
Remain alert at all times! Pay
attention to what you are doing. Proceed
with caution when working with the tool. Do
not use the power tool when distracted.
Check the power tool for any
damage! Before continuing to use the
power tool, check all safety devices and
any slightly damaged parts to make sure
they function properly and as intended.
Check that all moving parts work properly
without jamming and whether parts are
damaged. All parts must be properly
fitted and meet all the conditions to ensure
the proper operation of the power tool.
Damaged safety devices and parts must
be properly repaired or replaced by a
specialist workshop unless otherwise
indicated in the instructions.
Damaged switches must be replaced at an
authorised customer service centre.
Do not use any power tools that you cannot
switch on and off with the power switch.
m
CAUTION! The use of other tools and
accessories could lead to an increased risk
of personal injury for you.
Have your power tool repaired by
a qualified electrician! This power tool
complies with all relevant safety regulations.
Repairs may only be performed by a
qualified electrician using original spare
parts; otherwise this could lead to accidents
for the user.
Product-specific safety
instructions
m
WARNING!
u Do not use damaged or deformed discs
or brushes.
Bekijk gratis de handleiding van Parkside PDFW 120 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDFW 120 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9931 MB |
