Parkside PDFW 120 B3 handleiding
Handleiding
Je bekijkt pagina 18 van 86
16 GB/IE/NI/CY
e) If the cutting disc jams or you
stop working, switch the tool off
and hold it steady until the disc
has completely stopped turning.
Never attempt to pull a rotating
cutting disc out of a cut. This could
lead to kickback. Identify and remove
the cause of the jam.
f) Do not switch the power tool
back on as long as it is in the
workpiece. Allow the cutting
disc to reach its full speed before
you carefully continue the
cut. Otherwise, the disc may jam, jump
out of the workpiece or cause kickback.
g) Support panels or large
workpieces to reduce the risk
of the cutting disc jamming and
causing a kickback. Large workpieces
can bend under their own weight. The
workpiece must be supported on both
sides, namely in the vicinity of the cut, and
also at the edge.
h) Be particularly careful when
making “pocket cuts” into existing
walls or other obscured areas. The
inserted cutting disc may cut into gas or
water pipes, electrical wiring or other
objects that can cause kickback.
Supplementary safety
instructions for working with
wire brushes
Special safety instructions for working
with wire brushes
a) Be aware that the brush can lose
wire bristles even during normal
operation. Do not overstress
the wires by applying excessive
pressure to the brush. The wire
bristles can easily penetrate light clothing
and/or skin.
b) Allow the brush to run at
working speed for at least one
minute before applying it to the
workpiece. Ensure that no one is
standing in front of or in line with
the brush during this time. Loose
pieces of wire could fly off during the run-in
period.
c) Aim the rotating steel brush away
from yourself. When working with
these brushes, small particles and minute
pieces of wire can fly off at great speed
and pierce skin.
Working safely
Keep your workspace tidy. Clutter in
the work area can cause accidents.
Take account of environmental
influences! Do not expose the power
tool to rain. Do not use the power tool
in wet or moist environments. Ensure that
your workspace is adequately lit. Do not
use power tools where there is a risk of
explosion or fire.
Protect yourself from electric
shocks! Avoid body contact with
grounded surfaces (e.g. pipes, radiators,
electric cookers, refrigerators and freezers).
Keep other people at a distance! Do
not allow other people, especially children,
to touch the power tool or the cord. Keep
them out of your work area.
Store unused power tools safely!
Unused power tools should be placed in a
dry, high-up or closed-off place out of the
reach of children.
Do not overload your power tool!
You will work better and more safely in the
specified performance range.
Use the right power tool for the
job! Do not use low-performance tools for
heavy work. Do not use the power tool for
purposes for which it is not intended. For
example, do not use a circular saw to cut
tree branches or logs.
Bekijk gratis de handleiding van Parkside PDFW 120 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PDFW 120 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9931 MB |
