Parkside PAGHS 20-Li A1 handleiding
Handleiding
Je bekijkt pagina 11 van 75
PAGHS 20-Li A1
GB
│
IE
│
NI
│
7 ■
■ Always use the replacement rails and saw
chains specified by the manufacturer. Incor-
rect replacement rails and saw chains can lead
to a breakage of the saw chain and/or kickback.
Additional safety information
WARNING!
► Stay alert, watch what you are doing and
use common sense when operating the
tool. Do not use the tool while you are ill,
tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while operating the
tool may result in serious personal injury.
► Avoid improper use. Use the machine only
as described under "Intended use".
■ Keep the handles dry, clean and free from oil
and grease. Greasy, oily handles are slippery
and result in loss of control.
■ Do not saw with the tip of the blade. This can
lead to a kickback.
■ Make sure that are no nails or pieces of metal
in the cutting area. Pay particular attention to
nails or pieces of iron in the area of the cut.
Also be careful when cutting hardwoods in
which the chain could jam. This can lead to a
kickback.
■ Be extremely careful when reapplying the chain
of the saw to a cut you have already started.
■ Do not saw any branches or pieces of wood
that can move their position during sawing or in
which the cut could close during sawing.
■ If the saw chain jams on the lower edge of the
guide rail, the saw can jerk violently away from
the operator.
■ Start the cut using full power and keep the saw
at top speed while sawing.
■ Ensure that there are no objects on the ground
that you can trip over.
■ Before using the tool for the first time, read the
operating instructions and pay close attention
to the safety instructions.
■ The warning and safety signs on the tool pro-
vide important information for safe operation.
■ In addition to the notices in these operating
instructions, all general safety and accident
prevention legislation must also be complied
with.
■ Keep plastic wrapping away from children.
There is a risk of suffocation!
■ Insufficiently informed operators can be a
danger to other people and themselves due to
improper use. The operator is responsible for
third parties.
■ Be very careful when handling the tool. Use
common sense when working and pay close
attention to what you are doing.
■ Lend the tool only to users who have experi-
ence with the tool. Hand over the operating
instructions at the same time.
■ When not in use, the tool must be secured to
ensure that it is not a risk to anyone else.
Secure against unauthorised access.
■ The user of the tool is responsible for all acci-
dents and risks that cause injury or damage to
other people's property.
■ Note that improper maintenance, the use of
non-approved spare parts, or the removal or
modification of the safety equipment can lead
to damage to the tool and severe injuries to the
operator.
Original accessories/attachments
■ Use only the accessories and attachments that
are specified in the operating instructions and
are compatible with the tool.
WARNING!
■ Do not use any accessories that are not
recommended by PARKSIDE. This can lead to
an electric shock and fire.
Bekijk gratis de handleiding van Parkside PAGHS 20-Li A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Parkside |
| Model | PAGHS 20-Li A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8216 MB |
