Handleiding
Je bekijkt pagina 16 van 40
16
English
An unusual image is displayed
≥ This TV has a built-in Self Test. Makes a diagnosis of
picture or sound problems.
> [ ] (on the screen) > [Device & Software]
> [TV Self Test]
≥ Turn off the TV by unplugging the power cord, then
turn on by inserting the power cord into the wall outlet.
≥ If the problem persists, initialize all settings.
> [ ] (on the screen) > [Device & Software]
> [Reset to Factory Defaults]
The image or sound from external equipment are
unusual when the equipment is connected via HDMI
≥ Set [HDMI Auto Setting] to [Mode1]. (p. 11)
No sound is produced from the connected HDMI
equipment
≥ Set the audio output format of the connected HDMI
equipment to PCM.
Voice control function does not work
≥ Has the remote control been paired with the TV via
Bluetooth
®
? (p. 15)
≥ Check the network connections and settings.
≥ Is the microphone switch on the TV set to off?
(p. 13)
Parts of the TV become hot
≥ Parts of the TV may become hot. These temperature
rises do not pose any problems in terms of
performance or quality.
When pushed with a finger, the display panel moves
slightly and makes a noise
≥ There is a little gap around the panel to prevent
damage to the panel. This is not a malfunction.
Why is the screen blank and the power LED
blinking?
≥ The TV has gone into shutdown mode to protect itself.
Try unplugging it for a few minutes and connecting it
again. If there was a temporary power surge on the
AC line it may now be OK. If the blinking returns, visit
https://help.na.panasonic.com/
About the inquiry
≥ Please contact your local Panasonic dealer for
assistance.
If you make an inquiry from a place where this TV is
not present, we cannot answer about contents that
require visual confirmation for connection,
phenomenon, etc. of this TV itself.
LED turns to orange
≥ Panel maintenance may be in progress.
LED turns to orange again in standby mode when the
TV is turned on / off before the panel maintenance is
completed.
≥ During panel maintenance, avoid touching and
exerting any pressure on the screen. (e.g. wiping the
screen, etc.)
≥ For more information
“Panel maintenance” (p. 13)
Maintenance
First, remove the power cord from the wall
outlet.
Regular care:
Gently wipe the surface of the display panel, cabinet, or
pedestal by using a soft cloth to remove dirt or
fingerprints.
For stubborn dirt:
(1) First clean the dust from the surface.
(2) Dampen a soft cloth with clean water or diluted
neutral detergent (1 part detergent to 100 parts
water).
(3) Wring out the cloth firmly. (Please note, do not let
liquid enter the TV inside as it may lead to product
failure.)
(4) Carefully wipe moisten and wipe away the stubborn
dirt.
(5) Finally, wipe away all the moisture.
<Caution>
≥ Do not use a hard cloth or rub the surface too hard,
otherwise this may cause scratches on the surface.
≥ Take care not to subject the surfaces to insect
repellent, solvent, thinner or other volatile substances.
This may degrade surface quality or cause peeling of
the paint.
≥ The surface of the display panel is specially treated
and may be easily damaged. Take care not to tap or
scratch the surface with your fingernail or other hard
objects.
≥ Do not allow the cabinet and pedestal to make contact
with a rubber or PVC substance for a long time. This
may degrade surface quality.
Wipe the power cord with a dry cloth at regular intervals.
Moisture and dust may cause fire or electrical shock.
Display panel, Cabinet, Pedestal
Power cord
TV-55_65_77Z95BP_X41G77MV03716A_eng_lsp.book 16 ページ ２０２５年３月１８日 火曜日 午後７時１９分
Bekijk gratis de handleiding van Panasonic TV-65Z95B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TV-65Z95B |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4734 MB |
