Handleiding
Je bekijkt pagina 15 van 40
15
English
Either Bluetooth
®
wireless technology or the infrared
communication function can be used for the
transmissions between the TV and the remote control.
Since voice controls (p. 14) use Bluetooth
®
wireless
technology, the remote control needs to be registered
(paired) with the TV.
≥ When using the remote control for the first time after
purchase, when you press any button while pointing
the remote control at the remote control signal
receiver with batteries inserted, the remote control is
automatically registered (paired).
≥ When registering, face the remote control at the
remote control signal receiver on the TV, within about
50 cm.
≥ Registration may not be completed correctly if the
batteries in the remote control are running low.
∫ Registering a remote control
Select [Add New Remote] with the following
procedure and follow the on-screen guidance:
> [ ] (on the screen) > [Controllers & Bluetooth
Devices] > [Voice Remotes with Alexa] > [Add New Remote]
If you have problems in pairing the Bluetooth remote
control, you need to reset it and try again.
1 Press and hold the buttons shown below
simultaneously for about 12 seconds.
2 Release the buttons and wait 5 seconds.
3 Remove the batteries and insert them back.
<Note>
≥ If the remote control is registered (paired) with the TV,
they communicate via Bluetooth
®
. You will not need to
face the remote control at the TV’s remote control
signal receiver when Bluetooth
®
communication is
used.
FAQs
Before requesting service or assistance, please follow
these simple guides to solve the problem.
≥ For details, refer to [Panasonic eHELP] (Support /
FAQ > FAQs).
≥ Try restarting the TV.
• > [ ] (on the screen) > [Device & Software] >
[Restart]
• Press and hold the Power button on the TV for
15 seconds or more.
It takes several seconds to display the image after
turning the TV on
≥ When turning the TV on, the panel adjustment is
performed. It is not a malfunction.
The TV does not switch on
≥ Check the power cord is plugged into the TV and the
wall outlet.
The remote control does not work or is intermittent
≥ Has the remote control been paired with the TV via
Bluetooth
®
? (p. 15)
≥ Are the batteries installed correctly?
≥ The batteries may be running low. Replace them with
new ones.
≥ Operation of the remote control is not possible due to
system startup when the LED is blinking orange. You
can use the remote control after the LED turns
constant red.
≥ Point the remote control directly at the TV’s remote
control signal receiver (within about 7 m and a
30 degree angle of the signal receiver).*
≥ Situate the TV away from sunshine or other sources of
bright light so they do not shine on the TV’s remote
control signal receiver.*
When infrared communication is used (p. 13)
No image is displayed
≥ Check the TV is turned on.
≥ Check the power cord is plugged into the TV and the
wall outlet.
≥ Check the correct input mode is selected.
≥ Is [Luminance Level] or [Contrast] set to the
minimum?
> [Picture] > [Brightness]
≥ Check all required cables and connections are firmly
in place.
Pairing the remote control
TV-55_65_77Z95BP_X41G77MV03716A_eng_lsp.book 15 ページ ２０２５年３月１８日 火曜日 午後７時１９分
Bekijk gratis de handleiding van Panasonic TV-65Z95B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TV-65Z95B |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 4734 MB |
