Handleiding
Je bekijkt pagina 68 van 191
68
English
External device link settings
Sets external device link.
[External device link settings]- submenu screen
External device link settings
Device information
Off
Wireless presentation link
On
Webex link
On
■ [Device information]
Sets whether to display or hide the information of
the device connected to the HDMI terminal or SLOT
terminal.
[Off]: Connected device information is not
displayed.
[On]: Connected device information is displayed as
shown below.
HDMI1
16:9
Player1
Note
●
The obtained information of either signal or
HDMICEC is displayed.
●
Up to the first 16 characters obtained are
displayed.
■ Wireless presentation link
This menu configures the settings for wireless
presentation system connection.
For details, refer to the operating instructions on the
following support site.
(https://panasonic.net/cns/prodisplays/wps2/)
■ [Webex link]
Sets the link of a Webex device.
[Off]:
Does not link with a Webex device.
[On]:
Links with a Webex device.
Note
●
When a Webex device is connected to the HDMI IN
1, HDMI IN 2 or HDMI IN 3 terminal, the link function
works.
●
The following functions are fixed.
•
[Video conference mode settings] of the
corresponding input is fixed to [On].
For details of operation when [Video conference
mode settings] is set to [On], refer to [Video
conference mode settings] (see page 75).
•
[Picture mode] is set to the suitable value.
•
[Over scan] is fixed to [Off].
•
[HDMI-CEC control] is fixed to [Enable]. [Display
→Device] is fixed to [Power off / on]. [Device→
Display] is fixed to [Power off / on].
•
[Quick start] is fixed to [On].
•
[Audio input select] is fixed to the corresponding
input.
•
[HDMI-CEC control] is set to [Enable].
When another device is connected to an HDMI
terminal other than the HDMI terminal to which
a Webex device is connected, if the HDMI-CEC
control is unnecessary, turn off the HDMI-CEC
function using that device.
•
When the link operation is in progress with a
Webex device connected, [Webex] is displayed on
the setup menu, etc.
•
Due to the specification of a Webex device, the
Webex device cannot be set to standby mode by
turning off (standby) the power of the display. (As
of April 2022)
Bekijk gratis de handleiding van Panasonic TH-75SQ2HW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | TH-75SQ2HW |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 26224 MB |
