Panasonic CY-VMD9000U handleiding
Handleiding
Je bekijkt pagina 11 van 16
E
N
G
L
I
S
H
68
CY-VMD9000U
83
E
N
G
L
I
S
H
67
CY-VMD9000U
82
Troubleshooting (Continued)
The disc is not ejected.
≥ CD is defective.
≥ Mechanical trouble.
➡Press [<] (EJECT). If failure persists, press the reset switch. If nor-
mal operation is not restored, call the store where you purchased
the unit or the nearest Panasonic Servicenter to ask for repair.
The buttons do not work.
Mounting angle is over 30°.
➡Adjust mounting angle to less than 30°.
Unstable mounting.
➡Mount the unit securely with the mounting parts, referring to the
section on installation.
Sound skip due to vibra-
tion.
The disc is dirty.
➡Clean the disc, referring to the section on “Notes on the discs”.
Some operations are not permitted with certain discs.
(Refer to the guide provided with your disc.)
Cannot switch the audio
language/subtitle lan-
guage/angle.
≥ It is not possible to switch if the disc does not have multiple audio lan-
guages/subtitle languages/angles recorded on it.
(Refer to the guide provided with your disc.)
≥ Some discs permit switching through a menu screen.
≥ Sometimes, switching angles is possible only with certain scenes.
The audio/subtitle lan-
guage selected in the
DVD settings is not used.
If audio or subtitles in the languages are not recorded on the disc, the
audio or subtitles do not switch to that language. (Some discs permit
switching through a menu screen. Refer to the guide provided with your
disc.)
Trouble Cause/Step
The radio antenna is not extended enough.
➡Fully extend the radio antenna.
Much noise is FM stereo
and monaural broad-
casts.
Station is too far, or signals are too weak.
➡Select other stations of higher signal level.
❐ Radio
Preset station is reset.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always live.
❐ Car Navigation, VCR, Camcorder, Rear View Camera, Rear Monitor
Rear view camera is not connected correctly.
➡Connect it correctly.
The picture from a car
navigation system is not
displayed.
Input setting of a car navigation system is not correct.
➡Make the input setting correct.
A VCR or camcorder is not connected correctly.
➡Connect it correctly.
The connection of a car navigation system is not correct.
➡Connect it correctly.
The picture from a rear
view camera is not dis-
played.
“AUTO” is not selected for the setting of a rear monitor.
➡Select “AUTO” for the setting.
The picture or the sound
of the second monitor is
not switchable.
Trouble Cause/Step
The picture from a VCR
or a camcorder is not
displayed.
Input setting of a camera is not correct.
➡Make the input setting correct.
The disc is inside but no
sound.
The disc is ejected auto-
matically.
The disc is upside down.
➡Place the disc in the correction direction, the label side up.
❐ DVD video, Video CD, CD
Trouble Cause/Step
The disc is dirty.
➡Clean the disc, referring to the section on “Notes on Discs”.
The unit can only play the following types of discs: DVD video, video CD
and music CD.
DVD playback mode is “DTS”.
➡Set “Dolby Digital” or “PCM”.
dts playback is possible when connecting to CA-TU9000U.
Bekijk gratis de handleiding van Panasonic CY-VMD9000U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | CY-VMD9000U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3269 MB |
