Panasonic CY-VMD9000U handleiding
Handleiding
Je bekijkt pagina 12 van 16
E
N
G
L
I
S
H
70
CY-VMD9000U
85
E
N
G
L
I
S
H
69
CY-VMD9000U
84
Troubleshooting (Continued)
Remote control is in the wrong direction.
➡Direct the remote control at remote control sensor on the display
unit.
Buttons are invalid for
operation.
Wrong the battery.
➡Check the battery.
The battery has run down.
➡Replace the battery.
Battery polarities are reversed.
➡Insert the battery correctly.
❐ Remote Control
Trouble Cause/Step
No disc is in the player.
➡Insert the disc into the disc slot.
" E1 "
No operation by some cause.
➡Press [<] (EJECT). If failure persists, press the reset switch. (Press
the reset switch in the CD changer.)
If normal operation is not restored, call the store where you pur-
chased the unit or the nearest Panasonic Servicenter to ask for
repairs.
≥ Disc is dirty, or is upside down.
≥ Disc has scratches.
≥ Disc is not ejected.
➡Check disc.
➡Press [<] (EJECT). If failure persists, press the reset switch. (Press
the reset switch in the CD changer.)
If normal operation is not restored, call the store where you pur-
chased the unit or the nearest Panasonic Servicenter to ask for
repairs.
Display Cause/Step
Error Display Messages
" E2 "
" E3 "
NO DISC
Notes:
≥ There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
≥ Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the
Operating Instructions for the changer used.
An attempt was made to play a PAL disc.
➡Press [<] (EJECT) and check the disc.
PAL/NTSC ERR
An attempt was made to play a disc with a region number that was not
“1” or “ALL”.
➡Press [<] (EJECT) and check the disc.
REGION ERR
No magazine is in the changer.
➡Load the changer with CD-loaded magazine.
NO MAGAZINE
❐ Display Settings
The brightness of the
screen is not stable.
The screen is not adjusted properly.
➡Make every adjustment of the screen.
“AUTO” dimmer is selected.
➡Select one of the dimmer levels from among “1” to “4” to make the
dimmer adjustment become free from light intensity.
The picture is dark.
The picture is whitish.
Something is wrong with
the picture. The picture
is light in color.
This is characteristic of liquid crystal panels and is not a problem.
Red, blue, or green
spots appears.
Trouble Cause/Step
❐ Sound Settings
Trouble Cause/Step
Left and right balance, or front and rear balance is off on one side.
➡Adjust BAL/FAD as appropriate.
No sound from left, right,
front, or rear speaker.
The right speaker wire is connected to the left speaker and the left
speaker wire to the right speaker.
➡Connect the speaker wires to the correct one.
Left and right sounds are
reversed in stereo listen-
ing.
Cables are not correctly connected.
➡Connect the cables correctly.
Bekijk gratis de handleiding van Panasonic CY-VMD9000U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | CY-VMD9000U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3269 MB |
