Panasonic CY-VMD9000U handleiding
Handleiding
Je bekijkt pagina 10 van 16
E
N
G
L
I
S
H
66
CY-VMD9000U
81
E
N
G
L
I
S
H
65
CY-VMD9000U
80
Troubleshooting
Preliminary Steps
Check and take steps as described in the tables below.
If You Suspect Something Wrong
Immediately switch power off.
Disconnect the power connector and check that there is
neither smoke nor heat from the unit before asking for
repairs. Never try to repair the unit yourself because it is
dangerous to do so.
Cautions:
≥ Do not use the unit if it malfunctions or is
something wrong.
≥ Do not use the unit in abnormal condition, for
example, without sound, or with smoke or
foul smell, can cause ignition or electric
shock. Immediately stop using it and call the
store where you purchased it.
No power.
Trouble
Car’s engine switch is not on.
➡Turn your car’s ignition switch to ACC or ON.
Troubleshooting Tips
❐ Common
Cables are not correctly connected.
➡Connect cables correctly.
Battery cable is not correctly connected.
➡Connect the battery cable to the terminal that is always live.
Accessory cable is not correctly connected.
➡Connect the accessory cable to your car’s ACC source.
Grounding wire is not correctly connected.
➡Connect the grounding wire to a metal part of the car.
Fuse is burnt.
➡Call the store where you purchased the unit, or your nearest
Panasonic Servicenter (see the attached sheet) and ask for fuse
replacement.
No sound.
Mute is set to ON.
➡Set it to OFF.
Cables are not correctly connected.
➡Connect cables correctly.
Speakers setting is set to OFF.
➡Set it to other than OFF.
Cause/Step
The volume is adjusted to zero.
➡Raise the volume.
The MAIN-IN is set to ON (when the digital surround processor is not
connected).
➡Set the MAIN-IN to OFF when you do not use the MAIN-IN (when the
digital surround processor is not connected).
Condensation (dew)
➡Wait for a while before use.
A mobile phone is used near the unit.
➡Keep the mobile phone away from the unit.
Noise.
Picture is not clear.
Only sound, no picture.
You did not pull the side brake (parking brake) lever.
➡Pull the side brake (parking brake) lever.
Side brake (parking brake) connection lead is not correctly connected.
➡Connect the side brake (parking brake) connection lead correctly.
❐ Common (continued)
The tilt angle or the
front-rear position of the
display is not adjustable.
The monitor direction is not proper.
➡Change the monitor direction to the center.
The monitor stops on the way to the home position for some reason.
➡Raise the monitor a little and press (OPEN/CLOSE).
There is an obstacle.
➡Install the unit where the unit moves freely.
❐ Monitor
The monitor does not go
back into the unit.
Trouble Cause/Step
Trouble Cause/Step
[]
Bekijk gratis de handleiding van Panasonic CY-VMD9000U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Panasonic |
| Model | CY-VMD9000U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3269 MB |
