Palmer BRIDGE 4A handleiding
Handleiding
Je bekijkt pagina 8 van 68
8
USER MANUAL
EN
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS - FRONT SIDE
1. INPUT 1 - 4
Audio inputs with 6.3 mm jack sockets (suitable for unbalanced and balanced cabling).
A. Connect an instrument using a shielded instrument cable.
B. Connect the speaker output of a guitar amplifier using a speaker cable (tip: press PAD switch no. 3).
2. THRU 1 - 4
The unaltered input signals of channels 1 - 4 are output via the THRU 1 to 4 6.3 mm jack sockets.
3. PAD 1 - 4 (Passive Attenuation Device)
Press the switch to reduce the level of the output signal by 30 dB. The output level must be reduced if the channel
input stage of the connected mixing console or audio interface is overdriven.
4. LIFT / GND 1 - 4
Switch for disconnecting the ground connection between the input and output (ground lift). In the non-pressed
position, the ground connection is disconnected; the connection is established when the switch is pressed.
The ability to prevent a humming loop using the ground lift switch depends on the grounding of the connected
devices. It is therefore possible that either switch position effectively reduces or eliminates humming.
5. OUTPUT 1 - 4
Balanced line outputs with 3-pin XLR sockets. Use shielded audio cables (e.g. microphone cables) to connect the
DI box to a balanced input of a mixer or audio interface.
6. POWER LED
The power LED lights up when the device is supplied with the required voltage.
4
6
5321
Bekijk gratis de handleiding van Palmer BRIDGE 4A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Palmer |
| Model | BRIDGE 4A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10631 MB |
